Quantcast
Channel: Intel Communities : Discussion List - Desktop Boards
Viewing all 4926 articles
Browse latest View live
↧

Chipsatz mit 30 min Timer?

July 12, 2016, 4:59 am
$
0
0

Hallo,

mein Acer Aspire E1-572G stürzt nach genau 30 min ab. Ich habe gelesen, dass ein Chipsatz von Intel (HM70) einen 30 min Timer hat, der das System nach 30 min ausschaltet wenn eine nicht dafür vorgesehene CPU verbaut wurde mit der das System aber trotzdem läuft. Ich habe zwar keine CPU gewechselt, da ein i5 U verbaut ist der also festgelötet ist. Ist so ein Timer auch im Acer Laptop? Es hat laut CPU-Z einen Haswell Ult Chipsatz und als Southbridge wird H8x/P8x angezeigt.

 

Acer will oder kann nicht helfen, die würden einfach ein neues Mainboard für c.a. 500€ verbauen, was ich nicht einsehe, da ja alles bis auf die Selbstabschaltung läuft. Sämtliche Softwarefehler und Überhitzung wurde schon ausgeschlossen.

↧
Search

DH77EB front/rear PWM fans spins but not detected by BIOS

June 1, 2016, 5:07 pm
$
0
0

Connected 2 Corsair SP120 HP PWM (4-pin) fans to front and rear chassis headers, both not detected by BIOS (EBH7710H.86A.0103.2014.1015.1532). Can anyone help? They spin, currently running silently. Have yet to try under heavy load if any change in speed.

↧
↧

At 90 I have a lot of equipment locked into the arena of Windows 2000 and XP and mu or 10 and I cannot find ( perhaps they do not exist ) any upgrades. So I have dug out from my old stock an Intel Desktop -01 motherboard and built a reserve computer to r

July 5, 2016, 2:09 pm
$
0
0

At 90 I have a lot of equipment locked into the arena of Windows 2000 and XP and much will not work on Windows 10 and many did not work on Windows 7, so I have dug out an old Intel Desktop-01 motherboard and built a reserve computer. However I cannot find the drivers and software for this board so can anybody help with a CD or know where to find the drivers etc.

 

Message was edited by: Lee Tracey This blog is software corrupted as it refuses to allow me to reply to Al Hill by saying I do not have permission to reply to this blog

↧

Last-ditch BIOS recovery

July 13, 2016, 7:20 am
$
0
0

If a board is unresponsive (no video, whether using on-chip graphics or a video card), there's nothing to be lost by attempting a Recovery BIOS installation in the hope that a confused BIOS can be convinced to return to the straight and narrow (this system died right after making what should have been a simple BIOS change, disabling network boot). I have two questions on that:

 

1) Does the Recovery BIOS process proceed if a user cannot see video and/or interact with the PC?

 

2) Does the Recovery BIOS process work with a single-step downgrade of BIOS, for example, if a board is already at the latest firmware?

 

I'm going to try it anyway, of course.

↧

Is nVIDIA Quadro K620 compatible with DH61HO?

May 26, 2016, 4:08 am
$
0
0

Will nVIDIA Quadro K620 work on Intel DH61H0 Motherboard?
What all should we see while buying a Graphics Card?
Does processor influence buying a Graphics Card?

↧
↧

WIN 10 and IRST manager

June 5, 2016, 10:17 am
$
0
0

I have updated to WIN 10 but I have lost my IRST manager. My MBs are D975XBX2 and DX79SR. Both have IRST R-5 and are working but how do I "manage" the raid set?

 

Thanks.    Cal

↧

How To Make DZ87KLT-75K Fully Compatible With Haswell Refresh e.g. (Core i7-4790K Devil's Canyon)

August 7, 2015, 4:05 am
$
0
0

I figured out how to make the DZ87KLT-75K fully compatible with Haswell refresh, in this post i confirm with a Core i7-4790K Devil's Canyon runs perfectly on the motherboard, short story is i had an i7-4770K initialy and happend to be in a position that allowed me access to the i7-4790K brand new boxed since i got it to work its now my main CPU in the DZ87KLT-75K

 

Before the steps as we all know the Haswell refresh CPUs are detected correctly in any 8series board by Intel, so what causes them not to function correctly is the Intel Management Engine (Intel ME), intel decided not to update the ME while updating BIOS, so the trick is just to update the Intel ME to aversion that come around same time as the Haswell refresh.

 

Steps

Assuming you have downloaded all the correct required files

 

1. I installed Core i7-4790K

2. Switched on PC booted into windows

3. I then followed steps to install

 

Intel ME 9.0 Consumer 1.5MB Firmware v9.0.31.1487

 

using this tool

 

Intel FWUpdate Tool for ME 9.0 Firmware v9.0.22.1467

 

I used the win tool in windows not dos

 

Everything went well shut down the PC then powered on again and all was well, restarted several times, even tinkerd with memory settings saved several times, run a stability test for 8 hour and all was ok

 

Intel ME files are found on this website along with all the necessary tools and instructions

 

http://www.win-raid.com/t596f39-Intel-Management-Engine-Drivers-Firmware-amp-System-Tools.html

↧

Intel Managment Engine Interface and Ethernet Connection Cannot Start - Error code 10

May 21, 2016, 6:48 am
$
0
0

INTEL DESKTOP BOARDS - DH61WW

 

Earlier I was using Windows XP

and few months back I encountered one problem

As and when I start my PC, my LAN does not work

SO I have to disable every time and then enable to make it work

 

I tried reinstalling and updating Ethernet driver also few times but none helped

 

Then I switched to Windows 7 and still facing the same problem

but now I have to Restart every time to make Ethernet Connection WORK

 

Please advice or provide a solution

↧
Search

DB85FL failed to install 2 SATA devices

July 16, 2016, 5:09 pm
$
0
0

Hi everyone.

I have a board DB85FL around  2 years (HDD 1TB, Processor Core I5 4 Gen, DVD SATA Optical Drive).   This morning the pc don't power on and  only recognize ONE SATA device, if  plug a USB device or another SATA device the board restart.

 

Do you have any antecedent of this failure?

Must be actualizate the bios?

 

Thanks for your response

↧
↧

Right Click on Desktop causes Delay because of igfxsrvc.exe

November 5, 2013, 10:34 am
$
0
0

Hello,

 

the process igfxsrvc.exe is apparently part of the Intel Common User Interface and in use/started when I perform a right click on the desktop which causes an annoying delay of about 2 seconds while opening the context menu.

 

What is that process for?

Can I disable it or is there another way to avoid the delay?

 

OS: Windows 7 64 bit Home Professional

Graphics Driver: 15.31.17.64.3257

Motherboard: Intel DQ77KB (processor i3 3220)

↧

db75en no longer boots, blue me_state led

July 13, 2016, 3:50 am
$
0
0

3 yr old machine, stopped overnight.

On the mobo is a blue led, that is lighting up when pressing the powerbutton, PS does not start, mobo does not start.

Checked the cmos-battery, is ok (3,15V), also i took it out and shortened contacts to erase cmos mem.

Removed memory, no beeps or any sign of life other then the blue led.

 

What can be the cause?

 

Gt

Leen

↧

Good morning. my problem esque try to flash a BIOS EF10MI2. (Buenos dias. mi problema esque intente flashear una Bios la mi laptop EF10MI2)

June 6, 2016, 10:26 am
$
0
0

Buenos dias. mi problema esque intente flashear una Bios la mi laptop EF10MI2 y al parecer se flasheo mal y ahora no hace nada. solo prende pero no manda imagen, no reconoce USB, solo prende el boton de power.

alguien sabe de que manera se puede reparar.?

 

 

 

Good morning. my problem esque try to flash a BIOS EF10MI2 my laptop and flash apparently wrong and now does nothing. only catches but does not send image, does not recognize USB, just turn on the power button.

anyone knows which way can be repaired.?

↧

DZ77BH-55K BIOS Recovery broken?

May 26, 2012, 12:33 am
$
0
0

I tried to update my BIOS with the recommend method described at the Intel Download Center (via Windows). This failed and now my computer does not boot anymore. I disconnected the jumper, like it is described in the Help Section to start BIOS Recovery, i've tried 3 USB thumb sticks, with 2 Bios Versions (57, 70) and two CDs (same versions). The furthest I came was POST Code 31 at the POST Code LED. Normally it stops at Code 20.

 

Anybody can help me with this problem?

Thank you very much!

 

PS: Sometimes the POST Code is "d0", in the manual it says "reserved for future use"...

 

Edit:

I'm using a i7-3770, i tried to change the RAM-Position (and with only one module) (its compatible with the MB (Samsung M378B5273BH1-CH9)) nothing changes. I unplugged every device and connector, except power, ram and CPU, nothing changed. Every time I give it a try I removed the CMOS battery and kept it removed for half an hour.

 

If I try to boot normally, the PC goes on and off in like a 1 second rhythm. In this mode I can hold the Power Button and it beeps (first beep at all anyway, till now never heard a Beep, even at first time start)

 

Display stays black all the time (with or without recovery jumper). I tried USB 3.0, USB 2 and supercharger USB Slots, nothing happens. I really don't know what else I can do.

 

Nachricht wurde geändert durch: Alessandro

↧
↧

RAID1 to RAID10

July 19, 2016, 1:07 pm
$
0
0

I'll be salvaging a rather old PC with DP35DP motherboard and Q9650 CPU.

 

I plan to keep the only 750GO HDD to run the OS and general programs and want to install 2 WD RED 3TO in RAID1 configuration. In the future, if I want to add 2 more 3TO (or larger) HDD and upgrade to a RAID10, will that be easy? Will I be able to do that without reformating all my drive? Or will I have to make an image of my RAID1 drive, format, reconfigure evyrthing and reload the backuped image?

 

Obviously, no matter how I do it, I will backup my data.

 

On a general note, in a 4 HDD RAID10 configuration, can I replace any HDD at anytime? Let say I have 3 3TO HDD and want to upgrade to 2x 6TO and 2x 3TO how would that work?

 

Thanks in advance

↧

DX79si reboots before Bios

July 10, 2016, 6:48 pm
$
0
0

Sooooooo.... The other night I tried playing with the Intel Extreme Tuning Utility and when I rebooted to accept the changes the PC entered into a boot loop. The PC functioned perfectly before I changed things using the utility. I tried removing the battery, disconnecting power, tried the back to bios button, tried the jumper and a mix of all the above. To my dismay... Nothing. PC enters a boot loop and the last code is either 67 or b7 or 6F or bF. There has got to be a way to clear the CMOS right? Please help...

 

oh I have an i7 3930k unlocked

2X16Gb Corsair RAM

DX79si MB

Nvidia GTS 450 graphics card

↧
Search

Does M2 ssd steal any PCI-E lanes from the 16 graphics lanes , chipset H97

July 20, 2016, 6:46 pm
$
0
0

Does M2 ssd steal any PCI-E lanes from the 16 graphics lanes , chipset H97

↧

Is nVIDIA Quadro K620 compatible with DH61HO?

May 26, 2016, 4:08 am
$
0
0

Will nVIDIA Quadro K620 work on Intel DH61H0 Motherboard?
What all should we see while buying a Graphics Card?
Does processor influence buying a Graphics Card?

↧
↧

Troubleshooting Wake on LAN on DZ77GA-70K Windows 7 x64

July 21, 2016, 2:53 pm
$
0
0

I tried several ways to setup WOL on my DZ77GA-70K Windows 7 x64 system on 82579V LAN interface. The closest solution is to leave on Power Management tab only “Wake on magic packet” checked – other options unchecked. Driver version is 12.10.28.0. (after installation of LAN_Win7_64_PROWin_19.1.exe) From another PC I sent packet with special tool that sent packet with MAC. This cause my computer getting awake from s3 (sleep). But this work only about several minutes after getting sleep. After about 10 minutes computer does not response and stays in Sleep mode (it’s possible to turn it on by pressing keyboard button). I think the problem is something related with DEEP sleep – I think PC turns off some LAN components after several minutes. How to disable this Deep Sleep? Or what is the way to use Wake on LAN on this mainboard?

 

Power.png

↧

Graphics Driver for DQ77KB and Xeon E3-1265L v2

January 16, 2014, 7:09 am
$
0
0


Hi, I've recently built a new system using a DQ77KB desktop board, and a Xeon E3-1265L v2 CPU. The CPU is listed as compatible with the board, and it works perfectly fine. I have installed Windows 7 64-bit on the system, and that works fine too.

 

The only problem I have is that the graphics driver for the board (HD Graphics Driver for Windows 7), that is available from the download center, says: "This computer does not meet the minimum requirements for installing the software" during installation. I would assume that it is not compatible with the CPU, as in the "Read Me" file, Xeon is not listed. This means that I have to work with default in-box drivers from the Windows 7 Installation.

 

What I find odd, is that it has exactly the same graphics (HD Graphics 2500) as the i3-3220 (which I am using with another DQ77KB board).

 

Is there any way to get WDDM graphics drivers to install for this setup?

 

I appreciate all help.

↧

DH55HC mother board and 2X4GB memory of ARES G.SKILL

July 22, 2016, 12:03 am
$
0
0

hello

i got DH55HC mother board and 2X4GB memory of G.SKILL, i just got a new 2X4 G.SKILL ARES memory, i try to put it in, the bios see the 16GB BUT When i starting windows its keep getting hang in loading windows screen, i try many thing i read online nothing work, even putting only  4GB G.SKILL ARES in not good,

when i starting in safe mode i see i got stuck on the  classpnp.sys file'

even when i try to put in windows 7 setup disk same thing

 

any help will be appreciated

↧
Viewing all 4926 articles
Browse latest View live
Search