Hi all,
Nevertheless 64 bit OS is not supported on this board and there are no 64 bit grafic drivers
my question:
Has anybody the DN2800MT successful running with
Win8.1 with 64bit or Win10 64bit? with 4GB RAM
I am able to install but after a couple of hours it crashed with
various BSODs.
I changed the RAM but it doesn't help. BIOS is the newest.
Win8.1 with 32bit or Win10 32bit are working without BSOD.
Regards Thomas
Hi All !
I've upgrade my computer to win 8.1 now my Motorola Bluetooth adaptor is not working. When I click the icon the documents folder opens up. I've tried several different drivers all with the same result.
anyone know how to fix this?
Thanks John
Hello ,,,
With the upcoming release of the new Ivy Bridge-E 4960X processor, will there be a bios update for LGA2011 motherboards, and specifically the DX79SI ?
Thanks
Hello,
after installing alot of engineering softwares such as matlab and solidworks, this message started to pop out every time i turn on my computer:
bios has detected unsuccessful POST attempt(s) (...) press y to enter setup or N to cancel and to boot with previous settings.
well, it was working fine at the beginning when i press n it restarts and when i press y it goes to bios setup, but after few days my computer started to take alot of time to turn on it was like it keeps restarting every 5 seconds, and when i get this message if i press y it freezes and n it restarts, and if it worked and launched, the resolution would be really bad as if there is no vga detected. i tried formatting and the same thing didnt change but got worse.
my vga is nvidia gtx 670 with 16 gb ram envy hyperx and a db85l intel.
please if anyone knows how to fix it let me know.
thanks.
My probleem
i have 2 PC , the old one :
Intel DG41RQ
D.C cpu
4gb ram
no vga or any pci card .
when i turnd it on its not starting up , after intel logo , black screen with flashing cursor
i try to reboot and reinstal windows , if i plug a usb "bootable win7 or win8 i try 2 usb " its just freeze in intel logo and show 51 code in corner , normal is 50 then Eb then starting windows , any way each time i plug usb whatever flash or keyboard in all port . its freeze in intel loge and show 51 cod . even i unplug HDD . DVD and just only usb the same code 51 and freeze .
i try plan B instal it form windows DVD , after intel logo , freeze in black screen with flashing cursor .
what i did :
rest the M.B Bios by removing batt
log to bios and load deff , and check if MB can see HDD and its show all driver installed
change ram with work one
change cpu with work one
change power supply with work one
change sata cable
un pluge front usb > sound >light cable
cheked MB , no dead capacitor , if i remove ram beeb 3 times , cpu temp normal 30C ..
HDD worked fine in other PC
remove all parts and keep only ram cpu MB and usb flash , the same result .. freeze cod 51
if i remove all usb : intel logo > insert boot device , if i plug in usb in that time , freeze and must unplug power ...
the only defferent things happen .. I BOOT FROM DVD when HDD unplug and its reach windows install , but when i plug hdd black screen with flashing cursor even if i chose dvd from boot menu "F10" , i try to plug in the HDD while windows loading install file ,but show no media to install win 7 , i mean can't see the HDD ........ sorry for long post . help please
Hi I'm using Intel i5, DH61WW motherboard, 8gb ram, 1tb HDD, nvidia ge force 8400gs graphics card.
My Ethernet port shows green light even if the lan is not connected. And when the lan is connected, still it shows green and doesn't blink.
And internet was not working. I uninstalled Ethernet controller driver. And when I reinstall, it says device cannot start and can't install driver. I thought that bios update might solve my problem. I updatedb bios. Now the windows won't boot.
I cannot boot from any other medias..
I tried to recover from .bio file. But it says, bios update failed. Please help me with my problem.
Hi I'm using Intel i5, DH61WW motherboard, 8gb ram, 1tb HDD, nvidia ge force 8400gs graphics card.
My Ethernet port shows green light even if the lan is not connected. And when the lan is connected, still it shows green and doesn't blink.
And internet was not working. I uninstalled Ethernet controller driver. And when I reinstall, it says device cannot start and can't install driver. I thought that bios update might solve my problem. I updatedb bios. Now the windows won't boot.
I cannot boot from any other medias..
I tried to recover from .bio file. But it says, bios update failed. Please help me with my problem.
Hi guys
I have a problem whit intel desktop board that have b0other me a few times in the past, when I reset the cmos and reconfigure it, I can save my setting but the gonna be erase if I cut the power, its seems that the battery is failing but even whit anew battery still is the same problem. I f I cut the power whe the pc is of the cmos los its configurarion. is there any fix? or it it time to replace the board
thanks in advance.
Hi,
I have a Intel NUC BOXD54250WYKH1, I made the error of switching in the bios option to 'Fast Boot', and now on power up or restart it goes directly into windows boot sequence without giving the option of F2 to go back into bios setup.
Does anybody knows a trick to get back into the bios setup ?
Thanks.
Hi All
Does anyone on here know if if I delete the secure boot keys without backing them up if that will cause a problem when installing windows 8.1 on a new pc build. I'm booting from DVD but it won't let me because its in secure mode. I can't yet turn off secure mode because in order to do this I need to clear the secure boot keys. I'm using an asus z97-E motherboard with i5 haswell. When I try to save the secure keys it says 'unable to write to file - dbx' - I can't figure out from anywhere or any other forum what this means, and whether I am safe to clear them anyway.
the dbx file appears to be present because when I ask it to load the default it does, but I can't save them either. I've spent two days trying to sort this out and am now at the end of my tether!
thanks
I was using a DH87MC mainbord with 8GByte for a while without any problems. Now I would like to upgrade to 16GByte. Therefore I have added two DIMMs, which are identical to the old ones. With this configuration the system does not start anymore. After switching it on, some seconds later it switches off by itself. There is nothing on the screen and no beep. The new RAM is OK. I can choose any two of four DIMMs and any two sockets and it works. With four DIMMS it does not work.
RAM: 2 pairs of Kingston KVR1333D3N9K2/8G
CPU: i7-4770
BIOS: current (0158)
what can be the problem here ?
I hope, that someone can help me.
thanks in advance
I recently bought an Intel Extreme Board DZ77GA-70K, for my Intel i5-2400. It was working alright for the first couple of days, but now it won't get past the Intel splash screen. The motherboard post LED says "Cb", I looked it up but everything I find says that it's "Reserved for future use". I caught a hint somewhere that it might be a graphics issue, but I put a graphics card in the system, and it's still having the same post code.
Any one help me for LAN drivers of my Intel DH67BL mother board having OS Windows Server 2003 Standard Edition Service Pack 2 (32 Bit)
Hi All !
I've upgrade my computer to win 8.1 now my Motorola Bluetooth adaptor is not working. When I click the icon the documents folder opens up. I've tried several different drivers all with the same result.
anyone know how to fix this?
Thanks John
My Intel Dh67BL Motherboard and Core I5 3550 processor fan is not working properly.
Processor Fans rotates one round then stop again rotates then stop.
This process is repeating and not showing display
what to do now?
Hi Gurus,
We had integrated a system with Intel DX79SI, Intel 3960X, 4x8GB RAM, Asus HD7970 DC2T-3GD5 GPU, Adaptec 6405 RAID Controller, 4 SAS Drives, DVD RW, 1000W Cooler Master PSU etc. On Powering up the system, the POST screen along with system details RAID config etc and freezes with 0_ post error on screen. The On board Diagnostic LED show 00. But system does not boot to OS. The display shows 0_ on right bottom. The same graphic card and other components are functional with Asus Rampage iv extreme. The BIOS ver is 553.
Kindly advice and help to find a solution.
Thanks in advance.
hello I have DP55WG, i7 860, Windows 7x 64, and 2 kingston kvr 1.5v of 4GB and other two same kingston kvr 1.5v but 2GB each one. Total I have 12 GB, my problem is that I can only see 8 GB, I don't now what to do or if this combination can't fit on my mother board, any suggest please?
Thanks in advance!
Hi my intel dz77re-75k motherboard wont power down completely when i click shutdown. I tried Windows 7 64bit, windows 8 64bit. It was shutting down but all of a sudden it stopped. I downloaded the latest intel bios for the board but not even that helped. Please assist me. All the ports of the board are working 100%. The pc works great but wont shut down.
Hi Fellas,
It's been a mess since I switched to LGA 1155 board as the motherboard takes 2 freaking minutes to load the OS. Following is the on screen process of this issue :-
1. As soon as I switch on the System Unit the BIOS screen pops up with Immediate POST code EB.
2. Gets Stuck for 2 Minutes.
3. Displays F2(BIOS) & F10(Boot Options) with Post Code 98
4. Displays POST code BA.
5. Loads The OS.
My PC Specs :-
I've been using a nVidia GeFore GT520 2GB DDR3 Graphics Card Since 4-5 Years on my LGA775 Board Dual Core Series (DG41TY) & it ran smoothly without any issues, Connected on this board as well.
8 GB RAM (2GB x 4 RAM SLOTS)
i3 530 CPU @ 2.93Ghz
320 GB Internal WD HDD
2TB WD External HDD 3.0
I Noticed when the system unit boots the external HDD LED flashes for a little more while than usual.
Please HELP me to fix this issue.
Immediate reply will be highly appreciated.
Hi guys
I have a problem whit intel desktop board that have b0other me a few times in the past, when I reset the cmos and reconfigure it, I can save my setting but the gonna be erase if I cut the power, its seems that the battery is failing but even whit anew battery still is the same problem. I f I cut the power whe the pc is of the cmos los its configurarion. is there any fix? or it it time to replace the board
thanks in advance.