Quantcast
Viewing all 4926 articles
Browse latest View live
↧

DZ87KLT-75K USB 3.0 Driver problems. Help?

August 30, 2013, 1:00 am
$
0
0

Hi, I'm not the best at explaining things so please bare with me .

I have an Intel DZ87KLT-75K motherboard which has support for additional USB3.0 ports (obviously) and I have a CoolerMaster HAF X case, which has 2x USB3.0 ports on the front. I have them plugged straight into the correct spot on the motherboard (the blue 20-pin? port), they work all well and good without the USB3.0 drivers but only at USB2.0 speeds (obviously) that's no issue. But when I install the USB3.0 drivers for my board and OS: win7 64-bit this one- (Download Center) they work at full USB3.0 speeds, however, when I have a device plugged into them, there is no option to safely remove the device. It has completely disappeared as though the device is not removable. This is ONLY when the USB3.0 driver are installed. And ONLY with the 2x front USB3.0 ports on the case. All other USB3.0/USB2.0 ports work flawlessly. I have tried using third party safely remove tools, still the devices don't show. Happens with both flash drives and portable HDDs. I tried a fresh installation of Windows, still does the same thing. Took me a while to figure out but after long hours spent of trial and error I have decided it's definitely something to do with the driver itself. I've played around with the settings in device manager/BIOS, still doesn't seem to have an option regarding safely removing media. At first I thought maybe it was a feature of the driver and it just didn't need to be done but after only a few days of using no safely remove and just yanking the drives out after use, I had corrupt data, missing files etc. Maybe there is an option somewhere I have missed that needs to be changed? I don't know.

I have googled so many times and looked all over forums to see if anyone is experiencing the same problem and I cant seem to find any info on this exact problem anywhere so here I am seeking any advice/help to overcome my issue.

 

If I have left out any vital information that may help please let me know, greatly appreciate any help that may be provided

Thanks.

↧
Search

DH67CF

May 5, 2015, 11:35 am
$
0
0

Hi,

     Is the DH67CF ITX motherboard able to supply power to the USB devices in S5 state (full power off).I have FLIRC-SE and can only power down.

 

Many thanks.

↧
↧

DZ68DB board can see drives bigger than 2 TB?

April 29, 2015, 1:54 pm
$
0
0

I have a computer with a DZ68DB board.

My old dataImage may be NSFW.
Clik here to view. drive (D)  was going bad so I bought a 5 TB Toshiba drive to replace it. I plugged it into an external caddy and formatted it to a single GPT partition. I copied over the data I needed and then powered down removed the bad drive and installed the new drive.

When I rebooted the BIOS sees the new drive but Windows, Disk Management, and DeviceManagerImage may be NSFW.
Clik here to view. do not. It is Windows 7 system.

I switched the SATA cables between my boot (C)  drive and the new drive to see if it was a bad cable or onboard controller. In each case, Windows sees the C drive so its not a cable issue. If I take the drive out and plug it into the USB-3 external caddy (EZ-Dock 2) it reads it fine. However, plugged in as an internal drive the system can't see it.

Is this board capable of seeing a drive greater than 2 TB? I heard that the problem was that I formatted it outside of the computer so I bought another one and put it in the computer, expecting Windows to see it and I would format it normally. It didn't see that one either. Any idea what is going on?


↧

DX79SI Hang at POST Code 58

December 15, 2012, 10:58 am
$
0
0

My DX79SI hangs with a POST code of 58.

 

Problem Details:

  • I updated the BIOS a few weeks ago to the latest (I can't tell you the BIOS version because I can't boot my system). The system's been rebooted a few times since I updated the BIOS.
  • When I rebooted my system today, I first got stuck at POST 9B. After unplugging and plugging back in various USB mice, eventually the BIOS decided to get stuck on POST 58.
  • I tried using the Back to BIOS button but it had no apparent effect. So, I moved the BIOS jumper to "configuration" and rebooted.
  • Now, I get the BIOS splash screen (with the extra, redundant Intel logo) and the number "58" at the lower right. There is no other text on the screen. There the computer sits for several minutes. (Several minutes == >5 minutes). After that, I get a black screen with a flashing cursor in the upper-left corner. And it's still there after 10 minutes...

 

Hardware Details:

  • 32GB XMP memory
  • Nvidia GeForce 670
  • Various USB peripherals
  • Three SATA drives

 

My question is: How can I get my system working again? Is it time to ask for an RMA? Thank you.

 

Stuart

↧

DX79SI and usb 3.0 problems

April 4, 2014, 10:25 pm
$
0
0

After much diagnostic mucking I realize my portable drive problems are due to the USB 3.0 ports on this motherboard. It seems all the prior threads on DX79SI USB 3.0 problems die around the beginning of 2013 with no solution. I am having all the problems mentioned in previous posts, in particular:

 

1) boot hanging for 20 seconds on "58"

2) if I leave my WD Elements or Passport drive plugged in to USB 3.0 port (front or rear) when I reboot I get a yellow bang in Device manager for the USB 3.0 controller with the error message "device cannot start". Uninstalling the device and scanning for hardware changes fixes it.

 

If I use the USB 2.0 port....no problems at all just slower speed of course.

 

I have tried BIOS 525 (which says fixes the problem), 537 (just because I had it) and 594. No difference. I have the latest 2.1.28.1 Renesas drivers.

 

This problem has been around for years has anyone ever fixed it? (without buying a new USB 3.0 card!).

 

DX79SI, 3820 processor

16 Gb RAM

Windows 7 Pro x64

WD drives are the only USB 3.0 devices.

 

Thanks,

Matt

Image may be NSFW.
Clik here to view.
↧
↧

DX79SI - Poor USB3.0 & LAN driver support

January 16, 2012, 10:29 pm
$
0
0

I'm having major issues with the USB3.0 driver support for the DX79SI, and it looks to be interfering with the “Intel 82579LM Gigabit Network Connection”.

 

The system frequently hangs when loading Windows 7.  Once I finally get it to load successfully, I notice that the “Intel 82579LM Gigabit Network Connection” was not able to start successfully.  Also, an extra “Renesas Electronics USB 3.0 Host Controller” device appears under “Universal Serial Bus controllers”.  That leaves 2 USB 3.0 Host Controllers & 1 Hub in Device Manager when I only remember 1 of each with a fresh install.

 

Intel, I’d be happy to provide any additional info you need about my set-up.  The only new components in this system are the motherboard and processor.  This issue happens with previous and fresh installs of Windows 7 x64.

↧

DH55TC (nur) only Channel B 0+1 (nutzbar) usable ?

May 7, 2015, 5:14 am
$
0
0

For Translation scroll down please.

 

Hallo,

ich habe hier das Mainboard:
DH55TC
mit der CPU i3 530.

 

Sobald ich einen Speicherriegel in Channel A 0 oder 1 stecke, bootet das Board nicht mehr.

 

Es gibt keine Beep-Codes.

Der CPU Lüfter geht an, dreht ein paar Sekunden, fährt wieder runter, geht wieder an, in einer Endlosschleife usw.
Ich muß das Board über das Netzteil ausschalten.

 

Mit zwei getesteten RAMs von der IntelWebseite in Channel A0 und Channel B0 (den blauen Sockeln) geht das Board an, kein Bild, nach kurzer Zeit dreht der Lüfter auch Hochtouren.

 

In Channel B 0+1 (blau + schwarz) laufen zwei Speicherriegel je 2 GB ewinwandfrei im Single Modus.

 

Habe zum Testen damit problemlos Win 8.1 Enterprise installiert.

 

Das BIOS ist das neueste.

 

Woran liegt das ?

Board oder CPU defekt ?

 

Danke
+
Grüße Hajooo

 

...

 

Hello ,

I have the motherboard :
DH55TC
the CPU i3 530th

Once I put a 0 or 1 memory module in Channel A , the board will not boot .

There is no beep codes .
The CPU fan comes on , turns a few seconds , shuts down again , goes online again , in an endless loop , etc.
I have to turn off the Board through the AC adapter .

With two tested RAMs from the Intel website at Channel A0 and B0 Channel ( blue sockets ) goes to the board , a picture , after a short time the fan turns also in full swing.

In Channel B 0 + 1 ( blue + black ) two memory modules running 2GB ewinwandfrei in Single mode .

Have to test so easily win 8.1 Enterprise installed .

 

The BIOS is up to date.

 

 

Why is that?

Board or CPU failures?

 

 

Thank you
+
Greetings Hajooo

↧

DQ67SW (82579LM) LAN flapping when PC off

April 30, 2015, 8:00 am
$
0
0

Hi,

I have a problem with a bunch of Intel DQ67SW motherboards. When the BIOS is updated to the latest (v0067) then the LAN port starts flapping its network connection on and off a few times every second when the PC is off (connected to mains and LAN, but not running OS - so can be WoL remotely).

 

Logs from the local HP switch:

I 04/30/15 12:39:50 ports: port 6 is Blocked by STP

I 04/30/15 12:39:52 ports: port 6 is now on-line

I 04/30/15 12:40:05 ports: port 6 is now off-line

I 04/30/15 12:40:07 ports: port 6 is Blocked by STP

I 04/30/15 12:40:09 ports: port 6 is now on-line

I 04/30/15 12:40:21 ports: port 6 is now off-line

I 04/30/15 12:40:24 ports: port 6 is Blocked by STP

I 04/30/15 12:40:27 ports: port 6 is now on-line

I 04/30/15 12:40:38 ports: port 6 is now off-line

I 04/30/15 12:40:41 ports: port 6 is Blocked by STP

I 04/30/15 12:40:44 ports: port 6 is now on-line

I 04/30/15 12:40:56 ports: port 6 is now off-line

I 04/30/15 12:40:58 ports: port 6 is Blocked by STP

I 04/30/15 12:41:00 ports: port 6 is now on-line

I 04/30/15 12:41:13 ports: port 6 is now off-line

I 04/30/15 12:41:15 ports: port 6 is Blocked by STP

 

Eventually our local switch has enough and blocks the port.

 

I have tried various settings with the Windows drivers for energy efficient ethernet on and off, fixed 100MB/full duplex both ends but nothing seems to make a difference. The driver version also makes no difference (tried various ones from 17.3 to 19.1 latest).

 

At first I thought it was a hardware fault - but it is reproducible across 3 motherboards now.

 

I have not tried rolling back BIOS version by BIOS version to see when this behaviour started. It was not flapping with v0053.

 

When the PC is on it is fine and usually behaves normally. The PC is booted every morning but randomly (2 or 3 times a month) the LAN card will not connect with the local network.

 

The wiring has all been checked, tried different wall port - the problem follows the machine, tried different patch leads again the problem remains.

 

Any suggestions or pointers?

 

Thanks

Ian

↧
Search

DQ77KB - Bios update fails - error: FwUpdateFullBuffer

December 1, 2012, 2:41 pm
$
0
0

I need help updating the bios on my DQ77KB.

(Reason for the update is, that the board does not wake up from sleep sometime)

 

The update fails with the following screen:

Image may be NSFW.
Clik here to view. 2012-12-01 22.49.28.jpg

 

I've run the update process min. 10 times. Also tried to update with a usb flash drive.

No success.

Any help is appreciated.

↧
↧

Inetl server board S1200BT power on but no video output!?

May 3, 2015, 11:08 pm
$
0
0

Board: S1200BT

CPU: Xeon E3 1220V2

I removed all HDD

RAM: KVR1333D3E9SK2/8GI

 

When I pull the memory, I got 3 beeps.

 

Board LED XOXO OX XO

 

HELP PLEASE

↧

DH61CR, after bios update, fails to boot

January 19, 2013, 5:08 am
$
0
0

Hi everyone,

 

I have a pc with DH61CR motherboard, i5-2400, 4GB of RAM. Decided to update bios. Working bios was form year 2010. Express bios flash failed few times, with newest, and few earlier vesions. Decided to flash to next version after curent, working one. Success. Then I flashed one, from Dec 2012. Success. Bios looks different, mouse cursor, etc. Nice... The problem is, that it freezes in first BIOS window, showing Intel logo. If i press F10, i get boot devices list, but after selecting anything, it freezes, only reset helps. Bios update with F7 does not do nothing. Tried resetting BIOS, changing RAM, even CPU, without graphics card - the same. Tried BIOS recovery mode by removing jumper - no image, just cycling between on and off. Is there a way to revive motherboard? I have experience of 10 years of fixing similar issues, but I think only way now is RMA it. Any advice is very welcomed, thanks.

Image may be NSFW.
Clik here to view.
↧

DP67BG motherboard getting 1C Error Boot Loop.

May 8, 2015, 2:10 am
$
0
0

I just bought this board and I tried to install the R9 270x and just got 0_ error on the bottom right hand sode of the screen so i tried an older ati card which was a HD6770 and the computer booted just fine into my previous windows installation I had on the HDD.  Well I tried to put the R9 back in there to try to get it to work and I am now getting a 1C error on the motherboard.  I am really stumped I have tried taking out the ram and putting only one stick, two stick.  I even bought two different kinds of ram, one high performance and one low performance (1066) to see and nothing is happening I still the 1C error.  I even took the CMOS battery out and put it back in to try and reset the bios and still getting 1c error and bootloop.  Any advice?

↧

''Please Help Stuck at Intel Logo with 5A ''

May 9, 2015, 3:04 am
$
0
0
Hi.. I am using an Intel D945PLNM Motheboard And I have  Win 7  Installed on my Ide hard drive and i use my Sata because it has all of my personal files and games on it plus it is 500 gigs bigger.. I have a NVIDIA GT 9600 and It runs perfect , but I recently aquired a MSI NVIDIA GeForce GTX 670 and decided to try it knowingly it needs more power ...etc.. but I have a Cooler Master 800 power supply..and thought oh well what the hell ..so I tried it and it Came on ( as I was waiting for the board to melt.. Lol )but stuck at the Intel Logo with 5a (the Sata Code ) ..  So I removed the Sata HD and the card started booting fine with the Master Ide .... SO before I start experimenting further .. with the Cmos Jumper and other thoughts I was hoping if  anyone out there might know of a fix for this I was thinking it might be the Bios Boot up..was set for first  .... but it is configured right for the Ide as Master  .. so im stumped .. I know buy a better Motherboard.. But Thats another paYcheck away... long away ..lol Thank you for Reading this....  
↧
↧

Please Help Stuck at Intel Logo with 5a

May 9, 2015, 2:41 am
$
0
0
Hi.. I am using an Intel D945PLNM Motherboard And I have  Win 7  Installed on my Ide hard drive and i use my Sata because it has all of my personal files and games on it plus it is 500 gigs bigger.. I have a NVIDIA GT 9600 and It runs perfect , but I recently acquired a MSI NVIDIA GeForce GTX 670 and decided to try it knowingly it needs more power ...etc.. but I have a Cooler Master 800 power supply..and thought oh well what the hell ..so I tried it and it Came on ( as I was waiting for the board to melt.. Lol )but stuck at the Intel Logo with 5a (the Sata Code ) ..  So I removed the Sata HD and the card started booting fine with the Master Ide .... SO before I start experimenting further .. with the Cmos Jumper and other thoughts I was hoping if  anyone out there might know of a fix for this I was thinking it might be the Bios Boot up..was set for first  .... but it is configured right for the Ide as Master  .. so I am  stumped .. I know buy a better Motherboard.. But That is another paycheck away... long away ..lol Thank you for Reading this....  
↧

boot problem after BIOS update

May 2, 2015, 10:40 pm
$
0
0

Hi I'm using Intel i5, DH61WW motherboard, 8gb ram, 1tb HDD, nvidia ge force 8400gs graphics card.

My Ethernet port shows green light even if the lan is not connected. And when the lan is connected, still it shows green and doesn't blink.

And internet was not working. I uninstalled Ethernet controller driver. And when I reinstall, it says device cannot start and can't install driver. I thought that bios update might solve my problem. I updatedb bios. Now the windows won't boot.

I cannot boot from any other medias..

I tried to recover from .bio file. But it says, bios update failed. Please help me with my problem.

Image may be NSFW.
Clik here to view.
↧
Search

Warning : Missing AA#

May 10, 2015, 1:16 am
$
0
0

I have a system with Intel core i3 processor , Intel 61WWB3 Motherboard , 4 GB Ddr3 RAM , 1 TB Seagate Harddisk with Windows 8.1 installed in it .

The system was running fairly and recently when i started up the PC ,

  • Sometimes it is showing the message

     " The following warnings were detected during this boot
     WARNING : Missing AA# "

     and then it loads Windows.

     But the system is too slow. It gets hang for even a mousescroll .

  • Sometimes it shows the message
    "Insert proper booting device or reboot "

I tried to reinstal the OS .

But the system is not booting from the CD.

Also I cant change the booting device Priority .

 

I have connected a brand new Harddisk. But it shows the same message in the second case.
I have also connected a harddisk installed with Win 7 . It stops before the logon screen  and starts again .

 

 

 

Please help me with my problem

Image may be NSFW.
Clik here to view.
↧

Still no fixed BIOS for DZ68BC

May 30, 2012, 8:24 am
$
0
0

Alright,

 

It has been a while since Intel released the infamous 0035 BIOS for DZ68BC board.

I have not been able to use my desktop at all. Is it really taking so long? There is plenty of affected customers waiting for a solution.

 

Obviously Ivy Bridge CPUs are working fine with this BIOS since I have not heard any complaints. BUT all Sandy Bridge users are getting more or less BSODs. Many of the cases even with default BIOS settings and Turbo Boost disabled, like myself.

 

I am not going to RMA my board because I hate to rip off all the components and cables that I assembled so beautifully (Yeah, it is a custom PC that took almost 3 months to build and sleeve the cables etc)

 

If nothing happens in next two months, I have to violate my rig and replace the board with Asrock (considered before as junk brand... I guess its high end nowadays)

↧
↧

Virtual Box do not detect vt-x although enabled in BIOS

May 10, 2015, 6:44 pm
$
0
0

Hi!

I have a question regarding to this problems, what did I found that mostly PC with UEFI bios having problems detecting the vt-x. My current PC is unable to detect the vt-x but my old pc detect the vt-x that using legacy boot. I have tried looking for the answers in blogs, facebook groups and asking people about this problem but got nothing for the solution. Here is details about my old and new PC:

 

OLD PC

======

-Intel® Pentium® Processor E5700

- BIOS is America Megatrend with legacy boot only


- OS Windows XP SP2

 

NEW PC

======

-Intel® Core™ i5-3230M Processor

- BIOS is America Megatrend with secure boot


- OS Windows 8.1 Pro



Hopefully that Intel could do something to come out with solution for this kind of problem.

↧

Installing LAN driver, getting error " Cannot install drivers. No Intel(R) Pro Adapters are present in this computer."

May 10, 2015, 12:30 pm
$
0
0

HI,

 

I am having a trouble with my PC. I not able to connect with Internet due to I accidently deleted network adapter from Windows 7, after that I formatted the system and reinstalled Window XP.  Then I installing LAN driver, getting error " Cannot install drivers. No Intel(R) Pro Adapters are present in this computer."

 

Motherboard  : Intel (R) Desktop Boards D946GZIS

Processer: Core 2 Duo

↧

DZ77SL-50K "launching bios setup application" - then reboots

May 11, 2015, 9:08 am
$
0
0

I have a DZ77SL-50K MB with a i7 3770K with a 129G intel SSD (SSDSC2CW120A3) and a Sapphire 7970 GPU.
The machine boots fine but I want to add get into the BIOS menu and manipulate the settings but when I hit F2, the machine reboots.
If I do not his F2, the machine boots happily into Windows (7 64).
I flashed the BIOS to the latest version but still this problem persists.

I have tried to deactivate the fast boot that it seems to have but I simply CANNOT get into the BIOS.
BTW, my objective is to run 2 of those intel SSDs in RAID 0 as the MB natively supports this...if I could get into the BIOS.
Does anyone have any ideas?

↧
Viewing all 4926 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>