I am attempting to update the BIOS of an Intel Motherboard. I currently have the BA92510A.86B.0120.2004.1103.1007 BIOS loaded and I would like to update to the newest BIOS BA72210A.86B.0228.2005.1122.2349 . The IFlash program will not allow me to update the BIOS as BA92510 does not match BA72210. Anyone have any ideas on how to address this issue?
↧
SE7221BA1-E BIOS Update
↧
Problemas com Atuliazação de Bios da Placa DH61CRBR
Bom dia ....
Estou precisando de auxilio técnico, tenha três placa mae intel DH61CRBR , ambas estão com o mesmo problema não estartam com o processador INTEL CORE I3 3220 SOQUETE 1155.
Já vi varios foruns e tutoriais, achei o problema ou uma parte dele, e necessario atualizar a bios para a versão mais recente no meu caso a versão atual é a 0020, sei que não é possivel atualizar a bios diretamente para a ultima versão, então comecei a atualizar a mesma pela versões anteriores, comecei pela 23,28,34,35 e o problema necessito da versão 38 mas não esta mais disponivel na centro de downloads intel, disseram la no site que atualização estava com problema então foi retirara. O problema agora e que preciso atualizar para a versão 0113 para rodar o CORE I3, mas preciso dar continuidade as etapas de atualização ou seja a 38 para inserir a 41,42.44.48, 0.99, 0109, 0111, e 0113. Por favor preciso de ajuda não sei mais o que fazer
ATT Vseg Informática.
↧
↧
Intel Desktop Board DP55WB & Windows 7 34 bit drivers installation problem
Intel Desktop Board DP55WB & Windows 7 34 bit drivers installation problem. While i installated fresh operating system after i download driver from intel website still PCI Device showing yellow color.Please guide me.
↧
DX79SI + USB3.0 device from Cypress
Hi all,
we've got problems when connecting a Cypress USB 3.0 based device. The enumeration is broken when connecting a device. Thus it will not be recognized by the MB. When adding an external HUB between the device and the MB everything works.
Cypress told us, that this problem is 'Spread Spectrum' related due to shifting the PCI-clock.
Any thoughts?
Regards,
Franz
↧
Problems with Visual BIOS
Intel Visual BIOS version BLH6710H.86A.0160.2012.1204.1156,
Intel Desktop Board DH77EB, i7-3770 processor, Win 7 64 bit Professional,
Microsoft Wireless Mobile (Optical) Mouse 3000.
Mouse pointer drifts across a screen when used in Visual BIOS, works normally when used in Win 7.
↧
↧
Memory problems with new DZ77BH-55K
I finally got all of my parts and completed the build and when I turned the computer on I heard 3 beeps (memory problem) and a 32 error code. I got the computer to boot by switching the memory around and by using only one at a time, but only with 2 of the 4 memory modules. They will only work in the "B" channel, on Dimm 4 and 2. I can have one in Dimm 4, one in Dimm 2, or one in both. As soon as I add a module to Dimm 1 and/or 3, I get the 3 beep memory problem error and the computer will not boot. I even bought another memory module from the store (different manufacturer) to be sure. I've updated the motherboard bios to the most current version (BHZ7710H.86A.0070.2012.0416.2117) but still have the same problem. The memory also showed up as 1333 MHz in the bios, but I was able to change it to 1600MHz with no problems.
Here's the specs:
Motherboard: DZ77BH-55K
CPU: Core i7-3770 3.4 GHz
Memory: Corsair Vengeance 16GB (4 X 4GB) 240-pin DDR3 SDRAM 1600MHz (PC3 12800) Model CMZ16GX3M4A1600C9
GPU: Nvidia GTX 560 2GB PCI Express 2.0 X 16
Please let me know if you have any suggestions or are having the same problem, so we can find a solution. I really hope it's not a defective board, because I would hate to unplug everything, ship it back and wait for the new one to come.
↧
I7-2600K speed drops to 1600MHz on DZ68DB when running Prime95
Hello,
I've just put together a system with DZ68DB Intel motherboard and I7-2600K CPU. Right now: no overclocking, liquid cooling. When I'm testing it by running Prime95 torture test, the CPU speed drops to 1600Mhz shortly after the start as shown by "CPU-Z". The temperatures at this time are in low 50's C as shown by "Core Temp". What could be wrong?
Thanks
↧
Updating BIOS DZ77GA-70K
I am currently running BIOS 039 with this board and want to update to the latest. Can I just do an update of the latest or do I need to do incremantal updates and work my way up?
Thanks for the help,
John
↧
driver update
I have installed an old board (D101GGC) for some old games and have tried to use the update tool provided on the update page but for some of the drivers it says I need to contact the manufacturer this is an intel board, cpu, on board graphics and sound so what do I do now? Those are the things I am looking to update at this time
Thank you for your help.
↧
↧
DH61WW BIOS Ver. 99
Dear All,
I Have a DH61WW main board. Just bios updated where to download from Intel site. BIOS successfully updated, but unfortunately system not boot. Please help me to solve this matter.
sampath
↧
Graphics problem in DH61WW
i cannot install Intel HD graphics in DH61WW software. I am getting error message "This computer does not meet the minimum requirements for installing the software" However my computer has all compactabilities. Core i3 processor, 4GB Ram, 1TB hard disk and using Windows 7 Professional.. Can you please help me to sort out this problem?
↧
Need help for DH61WW Bios setting
Hi, I set the DH61WW bios to "Optimized Bood," but after setting, it skips the "bios setup" option when I reboot. Pressing F2 will not let me get into bios setting, and I can not boot from the DVD any more. Can someone help me how to undo the setting sothat I can change the bios setting again?
↧
Intel DH77DF mSata 6 Gbps capabilities
Hi,
I'm about to build a mini ITX Server using a DH77DF MB with an i7 3770.
I'm gonna be using the 2 x Sata 6 Gbps ports to host a RAID 0 array (HDDs) and the 2 x Sata 3 Gbps
for a RAID 1 (also HDDs), so there will be no Sata connector left. Thus, I will need to use the mSata
port to put one of your new 525 SSD which will serve as a VM datastore.
So, here are my questions :
1) I understand that the mSata port uses an adapter to be fitted in the PCIe slot. So, in other
words, if I want to use mSata at all, I can say good bye to the PCIe 16x slot, is that correct ?
2) Now, speed-wise, from what I gathered, mSata does handle Sata 3 speeds but is ultimately handled
by the H77 Sata controller which only supports 2 drives in Sata 3 / 6 Gbps mode.
So, which disks will have priority for Sata 3 speed in that case (2xSata3 + mSata connected) ?
I'm guessing not the mSata...
3) If so, will I be able to set the Sata 3 ports to run at Sata 2 speed so that only the mSata runs
@6Gbps and the other four HDDs @3Gbps (as Sata 3 is really not needed for HDDs) ?
Best regards
↧
↧
DH77EB + HD 4000 and 23.976Hz
This question was asked before but was never answered.
According to reviews on Missing Remote and Anandtec back in April, the new IB processors support 23.976Hz with a 'new' BIOS and appropriate drivers.
I have a DH77EB, i3-3225
BIOS 089
Win7 Sp1 x64
Driver v 2761
latest MEI (I think 8.0 or 8.1)
I can see that screen resolution 1080p23 is offered, as well as 1080p24
However, both result in a 24.00xxHz refresh rate.
What needs to be done to get 23.97xxx (i know it won't be perfect, but at least somewhere near the ideal value).
Cheers,
↧
memory upgrade for a D101GGC motherboard
I cannot for the life of me understand the manual for this board, in this case, with regard to the memory supported.
Memory •Two DDR SDRAM Dual Inline Memory Module (DIMM) sockets
•Support for DDR 400 MHz and DDR 333 MHz DIMMs
•Support for up to 2 GB of system memory
Will this support 2 gb of memory or not, if yes exactly what kind is needed?
NOTE
To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be
populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows
the BIOS to read the SPD data and program the chipset to accurately configure memory settings
for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly
configure the memory settings, but performance and reliability may be impacted or the DIMMs
may not function under the determined frequency.
Table 4 lists the supported DIMM configurations.
Table 4. Supported Memory Configurations
DIMM
Capacity Configuration
SDRAM
Density
SDRAM Organization
Front-side/Back-side
Number of SDRAM
Devices
128 MB SS 256 Mbit 16 M x 16/empty 4
256 MB SS 256 Mbit 32 M x 8/empty 8
256 MB SS 512 Mbit 32 M x 16/empty 4
512 MB DS 256 Mbit 32 M x 8/32 M x 8 16
512 MB SS 512 Mbit 64 M x 8/empty 8
512 MB SS 1 Gbit 64 M x 16/empty 4
1024 MB DS 512 Mbit 64 M x 8/64 M x 8 16
1024 MB SS 1 Gbit 128 M x 8/empty 8
Note: In the second column, “DS” refers to double-sided memorymodules (containing two rows of SDRAM) and “SS” refers
to single-sided memory modules (containing one row of SDRAM).
I' ve searched for memory with Serial Presence Detect (SPD) data structure but no luck.
Thank you for your help.
↧
Intel® Desktop Board DH77DF - BIOS Version 0106 - Breaks network interface
Hi There,
Anyone else here with DH77DF running the latest BIOS Version 0106?
I tried flashing it just now, flashes fine, Windows 8 x64 boots fine but the network interface doesn't work.
No matter what I do, drivers install, BIOS settings, it won't come up.
When I roll back to 0103 the network interface works just fine.
Thanks for reading.
↧
Understanding LED Post Debug Codes
Hello, I am in need of assistance in regards to deciphering LED Post Code information.
I have already located the manual page on Intel's website and have read through it. Where my confusion occurs is with the code "FF" which, according to the manual, translates to "Processor Exception." What does this mean and is it something I should worry about?
I'm using a DP55KG LGA 1156 with an i3-550 @ 3.2GHz and I'm dual booting Debian GNU/Linux v 7.0 "Wheezy" and Windows 7 Professional.
↧
↧
DZ77BH-55K Bios update 0097; CPU HOT
After updating my DZ77BH-55K from Bios 0057 to 0097, I have a no post situation. The CPU_HOT light on the board is RED and the computer just BEEPS. This update worked on 1 other computer but has failed on 2 others I have tried.
CPU: i7-3770
RAM: G.Skill F3-12800CL10Q-32GBZL (4x8GB)
I would like a real solution since I have 13 of these boards and am getting random bluescreens, I believe due to an issue fixed in BIOS 0096 "-Fixed issue where memory voltage is too low." I need to not RMA all the boards when this update fails.
Thanks.
↧
DX79SR Board not detecting EVGA GTX 680 Classified GPU on first ever boot!
Hi, I'm having trouble getting the Motherboard to recognize the GPU on its first ever boot. According to the box the MOBO is NVIDIA SLI ready, I cannot get to see BIOS due to motherboard not detecting GPU. I get the 2 beeps pause 2 beeps from the MOBO which means the GPU is not detected according to the sheet that comes with the MOBO. I have re-seated the GPU several times on the primary slot and have tried all other PCI express slots also. GPU's normal operation green light is on, GPU's fan is on. I do not have another GPU to rule out PCI express slot being damaged. Are there any known motherboard compatibility issues with this GPU? I read in one google search that some of the new graphic cards have a new UEFI-compatible VBIOS (GOP) and that this motherboard has a older version and does not detect it, is this true? What can I do? please help, thanks
Motherboard - Intel - DX79SR
GPU - 1x EVGA GTX 680 Classified
CPU - Intel Core i7-3930K Sandy Bridge-E 3.2GHz (3.8GHz Turbo)
Memory - 4x8GB G Skillz Ripjaws Z Series
PSU - Corsair AX860i 860W
Operating System - None-yet, trying to install Windows 8 64-BIT
↧
Drivers for graphics Intel GMA 3600/3650 - when?
Hi,
For last 4 months since new mainboards premiere there is no graphics drivers for Microsoft XP OS.
Our client ask about support to XP for new Intel products D2500CCE and DN2800MT.
Why it is so long? How is it possible to send products with no proper software support? 
Beta version drivers available somewhere?
↧