Quantcast
Channel: Intel Communities : Discussion List - Desktop Boards
Viewing all 4926 articles
Browse latest View live

dh67bl sata 3gb/s not working

$
0
0

Hello. I have a dh67bl motherboard and i am trying to install multiple drives but with no good results.

I have a corsair 90gb ssd...a Toshiba 3tb and a wd purple 4tb.

All work ok alone on the 6gb/s sata...in all configurations.

But when i try to add one on the 3gb/s sata i can sometimes see it in bios..but the windows doesn't recognize it. Windows on ssd is in ahci mode without uefi...and now i tried with another install on the wd drive ahci with uefi activated but with same results.

I am using a jumper settings to go to 3gb/s on the wd whenever i try to plug it in in the 3gb/s ports. the Toshiba as i know needs no such thing. Tried changing all the sata cables multiple times also.

Whenever i have a disk in the 3gb/s sata and i see it in bios...the windows boot hans..or just stays blocked....or sometimes it goes but i cant see the drive in windows; or i see it but i cant do anything with it.

Any ideas at this point are welcomed.

Thanks.


DZ77GA-70k, ACPI Suspend State missing from UEFI BIOS power menu, need help

$
0
0

So after transferring my PC from one case to another, the ability to sleep my PC in windows disappeared. Doing pwercfg -a in command prompt got me a very odd response:

 

powercfg display.jpg

 

So this pointed me to BIOS instead of Windows, and on youtube i found an overview of the BIOS of this exact board and saw that there is an ACPI Suspend State option in the Power menu pictured here:ACPI there.jpg

 

 

But its missing in my BIOS. Here is what i see

bios power.jpg

 

 

Is there wiring on the board that has a problem? Header? Some BIOS configuration of some sort? At one point, my entire BIOS got reset and i had to reconfigure my overclock and fan header settings, but that was nothing i hadn't already done before back when sleep worked. Any ideas? Im at a loss and i need to be able to sleep my computer.

Network Adapter will not start on cold startup.

$
0
0

Hey guys, I need your help.
I have been trying to fix this problem for 3 days now with no success.

 

Symptoms: On COLD STARTUP during BIOS POST initializing, network adapter will not turn on, no green light. After boot, device manager shows correct name of adapter Intel 82579V (FYI integrated) with yellow marking. The driver is loaded but has not started as indicated in the System information. If I reboot or disable the driver and then enable it, the network adapter will then turn on. Subsequent boots will keep the adapter working, but if I shutdown the PC completely and then restart, then the network adapter will be turned off. When I startup the PC with the power off (cold start S5 soft-off state), the network adapter will not start and when I check the adapter's properties-details-power data, the current power state will be D3, which means no power provided.

 

What I have tried:

1. Installed latest driver, resulted in same problem.

2. Installed the Intel NVRAM update to correct the chipset name of the adapter 82579V from 82579LM, resulted in same problem.

3. Installed a new CMOS battery, resulted in same problem.

4. Defaulted BIOS settings, resulted in same problem.

5. Jumped the BIOS pins and reset with full power cycle, resulted in same problem.

6. Jumped the Intel ME Engine pins and reset, resulted in same problem.

7. Basic checks: Reseated all cables. Checked the integrated adapter, no visual problems. Motherboard is less than 1 year old. Capacitors look fine.

8. Re-installed Windows, resulted in same problem.

9. Checked the network adapter WITHOUT Windows installed, resulted in same problem. Cold start, no power, but if you reboot from BIOS again, the adapter will turn on.

10. Tested with different Power Supply, resulted in same problem.

11. Oh yeh, unchecked all the power saving features under power management for network device, resulted in same problem.

12. Check BIOS LAN was enabled, resulted in same problem.

 

Now here's where I need yourhelp. I already did all of the above. The key check that I made is that WITHOUT the Windows and drivers installed, the problem still occurs, adapter does not start on cold startup, but if you reboot with just the BIOS installed, the green light will come on indicating the adapter now has power. That would indicate a problem in the BIOS POST not starting the adapter from a soft-off state or a mechanical off state.

 

Note: A related problem that occurred at the same time that this network adapter issue occurred is that if I shutdown the PC and then I shut off the surge protector that the PC is connected to, or if I just remove the plug from the PC, then I cannot restart the PC with the power button switch. Even with the new CMOS battery in, if I go from no power (G3 Mechanical Off), to plugging back in and starting the PC, it will not turn on. If I remove the battery while the PC is still plugged in, it still will not start. It will only start if I disconnect the power (Mechanical Off) and then remove the battery and then plug back in, and then hit the power button, then the PC will start.

 

It seems like there is a problem in the power settings within the BIOS, but even with a fresh BIOS Jump and default settings, results in the same problem.

 

My Specs:

Windows 7 32bit

DH61CR Motherboard (integrated Network adapter 82579V)

I5-2500 CPU

No additional PCI cards

Corsair PSU VS650

All Drivers are up-to date.
All Windows Updates installed.

Latest BIOS installed.

 

Thanks in advance for your help.

Windows 10 will not boot into UEFI mode

$
0
0

I just got a new WD Blue SSD (250GB) and I went for a clean slate, so I ran the windows installer from a microSD card (and adapter) and tried installing, couldn't do it (more reasons soon)

I found out that there were exceptions and hurdles to doing it this way, so I ran to the store to get a DVD-R and install like that.

 

Also did not work correctly, because I didn't boot the DVD in UEFI mode (I can't install windows 10 onto the SSD at all without GPT/UEFI mode)

So, finally got windows installed after that (seems easy here, but this took hours) and now Intel's DZ68DB Motherboard flat out refuses to boot the newly installed Windows installation.

 

The partitions are all GPT, UEFI is enabled, so is AHCI, no other drives are active when I'm trying to boot it (I have even disconnected the DVD drive to attempt to get this to work)

No matter what I do, I can't boot into windows directly (There is a "P0" option next to the disk, but no "UEFI")

 

The Windows Boot Manager just flashes the screen, as in, I select it, and the screen flashes, then the drive list is there. It seems to just fail to launch the boot manager for unknown reasons.

 

So there it is. At this point, I'm either going to be blaming the SSD itself (chkdsk from Windows Installer says nothing is wrong with it, and I've personally be able to write/read to it without issues) or the motherboard.

I am not sure why I can't force this to boot in UEFI mode, or why the windows boot manager won't launch, but I'm at the end of my rope and thinking about buying a new motherboard at this point.

 

Anybody know why this is happening?

DQ670W motherboard gives 1 beep but screen is blank. Is Mobo dead?

$
0
0

Hi, I'm running a DQ670W motherboard with a i5 3470 cpu. I have 2x2gb 1333Mhz ddr3 Hyperam and a 4gb 1333Mhz ddr3 Transcend. I tried each ram stick separately and all I get is a single beep but no screen display. BLANK!

 

I have tested 2 monitors and my TV, same result. Blank!

I have cleared the CMOS, moved the jumper pin, unplugged the PSU. NOTHING!

I have connected monitors directly to mobo to get BIOS, NOTHING!

One monitor has VGA and the other DVI output. Blank! No screen

 

Is motherboard busted?

 

PLEASE HELP!!!!

Desktop board dp67bg returns nothing when using wmic bios get serialnumber

$
0
0

Hello,

I was trying to install software that requires a bios serial number. In the past I could just press enter, but not any longer.

What I have been able to figure out so far is that the Intel® Integrator Toolkit seems to be able to program a string, which then would be returned by

the command wmic bios get serialnumber.

 

This post describes a similar problem and his resolution.

No Serialnumber in BIOS on Intel NUC

The author says:

Found the solution.

Using vcustw64.exe contained in the ITK download. This command will set the model name:

vcustw64 -SMBIOS -SP=NUC -QUEUE="%TEMP%\i.txt" -APPLYQUEUE

 

So this is what I am trying to do.

 

I have downloaded Intel_Integrator_Toolkit_6.1.6.zip, but it does not list my motherboard as a target of it.

 

Intel DQ77KB no video, no POST (2x2 beeps = video error?) after power failure

$
0
0

Hello guys,

 

Im having a setup with a intel dq77kb, 16 gb ram and an intel i7 processor. Worked like a charm for years untill a power failure in the house electricity this week. Everything went down and if I startup the computer I hear 2 times 2 beeps (with earplugs connected) which should be a video error. Since Im not having a external video card I guess the problem is the processor. I already stripped the board to the minimum (leaving only memory and processor). The same beeps remain leaving me with no post screen, no bios enter and no video output. Any idea what the problem is?

dx79 bios backup

$
0
0

Can you please forward the bios for this DX79SI motherboard to me.My motherboard also down, not giving display.I have confirmed it is Bios faulty.Tried the recovery option, didn't work.Please send it either in ".rom" or ".bin" format. USB Programmer CH341A, only supports the BIOS to be extracted in".rom" or ".bin" format & it is exactly 8MB

 

0460.bio is 8.19 mb

0494.bio is 8.19 mb

0650.bio is 9.69 mb

that the BIOS chip on our MB is 8 MB.


Please help me with backup of the bios of motherboard intel extreme

$
0
0

No matter if it is dz dx dp need a backup .bin

Problems updating the Management Engine firmware on DB75EN

$
0
0

My Intel Desktop Board DB75EN is affected by the AMT vulnerability.

 

I found a firmware update here:

Intel® Active Management Technology Escalation of Privilege Advisory...

 

However, when I try to install it, I encounter two problems.

 

First: I'm running Linux -- and the firmware update utility runs on Windows only. So is there also a utility available to update the FW under Linux?

 

As a workaround, I created a Windows 10 Recovery Drive (on a USB stick) and copied the update to that USB stick. I then booted the PC using that USB stick and tried to run the firmware update from within that Windows Recovery (WinPE) environment. I then got the following output:

 

D:\EN-FW-Update\EN-FW-Update-64bit>FWUpdLcl64.exe -f ME8_5M_Production.bin -generic

 

Intel (R) Firmware Update Utility Version: 8.1.40.1456

Copyright (C) 2007 - 2013, Intel Corporation.  All rights reserved.

 

Error 8743: Unknown or Unsupported Platform

Cannot locate hardware platform identification

This program cannot be run on the current platform.

 

Any idea why this does not work? And how to resolve it?

Intel D955XBK, IMPI Interface and PCI Serial Port errors, plus IEEE 1394B no longer recognized. HELP!!!

$
0
0

Hello, n00b here... I have a custom built desktop that was handed down to me, and I took it from an XP to Windows 7 Ultimate, 32-bit. I can no longer use the IEEE 1394B connection to transfer mini-DV tape footage from a Sony camcorder into this computer using either Sony Vegas 10 or Window MovieMaker 6. I have the 1394B cable and just in case, ordered the 1394A cable to see if it is just the cable. I REALLY need to get this hooked up. Any help? Any Advice?

 

Not sure if this could be the cause, too, but I am getting the error messages for IPMI Interface and PCI Serial Port in the Other Devices are in Computer Management/Device Manager. I have tried to download and install the 1394B_XP_32_4.0.1.exe driver, which FINALLY installed, but made no difference in recognition for the jack, or the error messages. I am officially out of options, and am open to new possibilities if you have them.

 

Last question: Can older technology like a IEEE 1394B connection be installed in newer computers? Thanks for any help that any of you can send!

 

Jack

Where to send BOXDX79TO for repair? (Discontinued board)

$
0
0

My board needs repair.  It is out of warranty and discontinued.  Who do I contact?

Looking For Help For a Motherboard Upgrade

$
0
0

I put together a desktop computer back in 2010 and am looking for some guidance on motherboard/processor for a new system.

 

I would prefer to go with Intel products and retain some of the components of my current system (case, power supply, etc.)

 

I would prefer to continue using the ATX form factor.

 

I use the computer strictly for home finance, spreadsheet, word processing, web browsing, email, photo storage and editing, ebook editing.  No games.

 

I'd like to have a good number of USB 3.0 ports and enough SATA sockets to handle at least three hard/SSD drives.

 

I would like to go with a new board and new processor so that I can be as certain as possible that I will be good for the next 5-7 years.  Probably a i7 processor.

 

Some help in choosing a new board and new processor would be great.

 

Any ideas?

DQ45CB Motherboard Bios Issues

$
0
0

Hi Guys,

 

I have a Intel DQ45CB board with a E9400 Core2Quad chip, the board powers on but no display, USB keyboard light off, Even when I try to boot into bios recovery, no display. Did the normal troubleshoot:

1. new CMOS battery

2. used a PCI-e GPU

3. new ATX12v ver2.2 PSU,

4. tried various 1GB DDR2 ram 

5. different case

7. working LCD screens & cables

Still no display....., is there a process of flashing the bios via USB with no display?

 

Any guidance will be appreciated

DQ77KB DMIC Header which Modules?

$
0
0

Hello,

i like to know which DMIC Modules or Mics can be connected to

the onboard DMIC header.

 

Searched the net up and down with less or no result.

Any recomendations?

 

thanks in advance

Sigi


Bios flash update ERROR?

$
0
0

I can not log in to "Windows", before loading this screen appears:

 

fb88d44c-3554-4c9b-90f7-c4153c90d22c.jpg

I've tried everything, i think, But this screen always appears .

 

Thank you!

 

Hola quise actualizar la bios de un DG41TY y ahora no activa los puertos SATA alguien sabe como arreglarlo? supongo arrancandolo con un pendrive y cargando un Archivo de BIOS que funcione, de ser asi cual seria ese archivo?

$
0
0

Hola quise actualizar la bios de un DG41TY y ahora no activa los puertos SATA alguien sabe como arreglarlo? supongo arrancandolo con un pendrive y cargando un Archivo de BIOS que funcione, de ser asi cual seria ese archivo?

Is the DH67GD MB UEFI Compliant?

$
0
0

I currently have several computers with this motherboard running Windows 7 x64.  According to the Intel Product Guide this motherboard offers the option to boot using UEFI.

Here is the version no. of my BIOS: 

The machines are booting with UEFI without any issue and otherwise operate normally.

However, I am using Acronis 11.7 backup software and it is giving me warning messages about the backups and the restores.

I contacted Acronis and they told me that my motherboard was not UEFI compliant.  Their recommendation was to just ignore the warning messages.

 

I guest I could do that, but I really wonder if it is truly non-compliant.  Here are the error messages that I received:

Message: 

  Boot Entry 'BootCurrent' cannot be found.

Additional info:

--------------------

Error code: 8

Module: 303

LineInfo: ebc2debf3646a6d0

Fields:

$module : disk_bundle_vs_50220

Message: Boot Entry 'BootCurrent' cannot be found.

--------------------

Error code: 65520

Module: 0

LineInfo: bd28fdbd64edb902

Fields:  code : 3489661184,

$module : disk_bundle_vs_50220

Message: Indicates the specified environment variable name was not found in the specified environment block

--

--------------------

 

I do know that the "50220" is the version of Acronis backup that I am using.  Otherwise, I don't know if these error codes and modules are BIOS modules for Acronis references.

I am still waiting on Acronis for more details, but I am not sure that will be provided.

 

I am hopeful that someone on this forum can identify these errors and tell me how to resolve them (if possible).

I have searched for UEFI testing tool, but haven't located any.

I am not sure if this is a BIOS issue or an UEFI boot volume issue.

 

Any assistance would be appreciated.

Problemas de sonido 5.1

$
0
0

Buenas. Poseo un PC cuya MOTHERBOARD es la Intel H81 modelo MSI-H81M-E33 (MS-7817). El equipo funcionó sin ningún problema hasta que me llegó la última actualización de W10, la Windows10 Creator. Al instalarse me desactivó el sistema de sonido 5.1 de Realtek High Definition Audio dejándomelo en sonido estereo. Y a pesar de que he intentado actualizar el controlador de todas las formas posibles que he podido encontrar en la red no logro solucionar mi problema. Los técnicos de Microsoft a través de los foros aducen que es el fabricante de la board quien debe actualizar los controladores. Es por esto que solicito su ayuda y orientación para saber que debo hacer.

Real Time Clock DST issue ICH8

$
0
0

I have a very unusual issue with the Daylight Savings Time operation of the RTC in the ICH8.

On April 2, 2017 at 2 am, several boards using Intel chipset ICH8 jumped 1 hour ahead.

We could not reproduce in the lab at first, but after several attempts, it did occur, then kept occurring every time we ran past 2am on 4/2/2017.

We found there was a bug in our software that was always setting Bit 0 (DSE) of register B of the RTC.

Turning this bit off disables the DST shift on the units that it was occurring.

Now, the question is: why did it not happen on all units?  Is there something else that would prevent DST when it is enabled?

And, why does it only do the "spring ahead" and not the "fall back" adjustment?

 

To get even weirder, the same bug that always enabled DST was also in an older product with intel 486 and MC146818.  Even though DST was always enabled, it never did DST adjustments (not on 1st or last Sunday in April or any other date tested).  Is there something else that disables DST even though Reg B of the 146818 enables it?

Viewing all 4926 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>