and keep getting an error message, I do not know if it is relevant but since I installed Window 10 I have been unable to use my CD/ROM drive even though trouble shooting tells me that it is working OK, I have asked the Microsoft community and followed a lot of instructions but it still does not work can any one help with either problem?
↧
I am a non-tech person but I been trying to install an update
↧
the system chasis was opened dp67bg
Muy buenas tengo una placa intel dp67bg,
al encender me sale el mensaje
the system chasis was opened
enter password to unlock system
nadie puso password al bios
ya intente con
-colocando el jumper en 2-3
-reinstalando el bios
-presionando el boton back to the bios
-por ultimo sace la pila por mas de 6 hrs
y aun me sigue saliendo el mismo mensaje
no se que podria hacer
gracias
↧
↧
I have a problem: DZ77GA-70K that I have just installed in my machine does not want to boot
The intel extreme motherboard DZ77GA-70K that I have just installed in my machine (Specs: Mobo: DZ77GA-70K, Cpu: Intel i7 3770K, Gpu: EVGA Geforce GTX 970 SC ACX 2.0 with 4GB Vram, 24GB RAM(2X4+2X8), HDD: 1TB WD blue + 1TB Seagate, PSU: Thermaltake smart 550W) does not want to boot (fans turn on but only thing on display is the intel extreme boards logo) i receive a digital code on the mobo that shows "F5" Anyone know how to fix this problem? Any answers are much apreciated! feel free to ask me any questions regarding further specs of my machine and/or the steps that I have attempted in making this machine work. Thanks again!
↧
actualice la bios de mi board dg35ec y el compu quedo muuuuuuuuuy leeeeeentooooooo, que puedo hacer. Gracias
Buenas noches
En verdad no se que hacer, estoy desesperado por la lentitud y eso que estaba funcionando super con un disco SSD, pero al actualizar la bios, todo se fue al traste. Gracias por sus ayudas
↧
DX58SO2 will not boot, no video, keyboard or mouse.
DX58SO2 will not boot, no video, keyboard or mouse. Starts up with fans and CD working but reboots after 5-10 seconds. Will boot with SO0920P.bio via cd. Video, keyboard or mouse work and the bios is updated. Same issue on reboot; no video etc.. Tried removing power and battery overnight. Next day, same issue. Any ideas on getting motherboard to boot?
Mike
↧
↧
Can I update bios for Intel DP35DP board and chip?
I am currently using an Intel DP35DPM board and P35 express chipset. However, since converting to Windows 10 I cannot receive updates. Is there an update to the bios that I should have if so how do I get access to it?
Ed Walsh
↧
hi i have motherboard ( DZ77GA 70K ) and a processor ( i7 3770 ) the CMOS show me the code 15 and she dont's boot
hi i have motherboard ( DZ77GA 70K ) and a processor ( i7 3770 ) the CMOS show me the code 15 and she dont's boot
some times show the code 10 and (14 with BIP)
thank you .
↧
DX79TO / R9 390X Fresh Build: 0_ in the Lower Right Corner of the Screen
I recently completed a "Fresh / Brand New" build, and when I attempted to load up the OS, a 0_ appeared in the lower right corner of my monitor. I've tried resetting the CMOS by changing the battery after approximately 2min, I've designated the Boot Order, I can hear the optical drive running (as I've tried all 3 of them)... but they eventually just stop. I can access the Setup /Flash Bios / Boot Menus, but that's it. There is a 00 on the board itself... I'm lost...
Intel DX79TO Motherboard
Intel i7 3930K CPU
Corsair Dominator Platinum DDR3 PC3 12800 / 1600MHZ (Max. Capacity / 64GB... 8 8GB Sticks)
OCZ SSD (240GB, 120GB, 960GB)
XFX Radeon R9 390X 8DF6
Creative SoundBlaster z
EVGA SuperNova 1000W G2
NZXT Phantom 830 Chassis
NZXT Krakken X61 Liquid Cooler
LG CD/DVD Drive x2
LG BluRay Drive
So,... I had an idea...What If... I temporarily installed my new SSD into my old computer, installed Windows, and then transferred it into the New Computer. I can then access the Setup Menu, designate it as the primary, and then restart it. If that doesn't work, I'll try switching the graphics cards. In just about every forum, and google search, about the 0_ in the lower right corner, EVERYONE says it's the graphics card's drivers/bios that need to be updated. I am also wondering, if it would be possible to load the Graphics Card Drivers onto the new hard drive...by using the included CD/DVD... without having that particular graphics card being installed?
Message was edited by: Doug Adam
↧
evga gtx 980 ti compatible with intel dz77 sl50k motherboard?
my friend baught a gtx 970 gigabyte g1 he insert the card in motherboard but coulnd get the pc to even boot up. he said it has something to do with UEFI bois. while other cards like gtx 770 and gtx 760 are working fine. I also have the same motherboard and I am upgrading from gtx 770 to gtx 980 ti so is it compatible with my motherboard?
↧
↧
I have a Mother board Intel DP35DPM WITH THE 775 SOCKET nd a processsor Core 2 Du0 E6750 2.66 Gn2 4Mb 1333FSB CPU. This was installed in2008 with Windows XP followed bu an upgrqade to Windoows 7 and this year to Windows 10. Everything worked fine untill
I have a Mother board Intel DP35DPM WITH THE 775 SOCKET and a processor Core 2 Du0 E6750 2.66 Gn2 4Mb 1333FSB CPU. This was installed in2008 with Windows XP followed by an upgrade to Windows 7 and this year to Windows 10. Everything worked fine until Microsoft provided a Upgrade to Windows 10. It attempts to install the upgrade and gets to 78% and indicates that it cannot complete and will remove all the changes. This takes about 5 hours. However, the computer performs correctly and aslong I do not shut it down al programs run just fine. Is there any BIOS upgrade that I should have? Do have any other suggestion for correction for correcting this problem?
Ed Walsh
↧
DX79TO Board Not Booting to USB or DVD
Here is my configuration:
DX79TO
BIOSSIX7910J.86A.559.2013.0305.2337
Processor i7-3820
Memory 1 Dimm 8gb 1.35 voltage
Video Gigabyte HD 6670
Here is what I am experiencing. When I first boot the system I get the intel splash screen with the "F" options and in the bottom right corner there is a 5A. If I leave the system alone, it goes to a BLACK SCREEN (Not Blank Screen) with a 0_ in the bottom right hand corner where the 5A was initially in the intel splash screen. On the actual motherboard, I get 00 on the LED display.
Now what I have tried to do is Boot to a Bootable USB and/or Bootable DVD.
The steps I take are simply pressing F10 and wait for the boot menu. I see my Hard Drive, DVD, USB and IBA GE Slot as options. So what do I do, I simply select the USB or DVD. What happens? As soon as I press the enter key on my keyboard, a little 0 pops up in the bottom right hand corner of the monitor. The system does not even attempt to process my command to boot to the media. It's like it is predetermined that it will not boot no matter what I do.
I was told that 00 on the LED means the board is in normal boot state and that there may be a problem with the board. I have no other tricks up my sleeve when it comes to making this board boot. I have removed all unnecessary devices and tried the most basic boot to no luck.-38 Any suggestions?
↧
windows 10 and problem with HDD external
Hello, I use windows 10 64 of motherboard msi b150m mortar. When I try to transfer a large file (8.9, 10 gb) from the PC to the hard drive 3,5" in the docking station, transfer is slow, often wavering. This also happens with an external HDD2,5" usb samsung, while a HDD Western Digital is all ok. I can transfer without problem big files from external hard drives to pcAll drivers are updated. Possible solutions please? Thank you
↧
the system chasis was opened dp67bg
Muy buenas tengo una placa intel dp67bg,
al encender me sale el mensaje
the system chasis was opened
enter password to unlock system
nadie puso password al bios
ya intente con
-colocando el jumper en 2-3
-reinstalando el bios
-presionando el boton back to the bios
-por ultimo sace la pila por mas de 6 hrs
y aun me sigue saliendo el mismo mensaje
no se que podria hacer
gracias
↧
↧
Overclocked i7 920 with DX58SO and Win7 Sleep - What a headache!
This has to be the most annoying PC problem I've ever had.
And that's saying something.
I have an i7 920 and a DX58SO board that's overclocked it to a nice stable 3.8ghz. Stress tested fine, temps were perfect.
Enter Windows 7 Sleep.
I had made sure my BIOS setting had the S3 enabled (had NO problems coming out of sleep with the stock settings) and left the PC for a while. I then came back expecting the PC to 'wake up'.
The fans turned on, the lights blinked, but the monitor remained black.
Okay.
I reset the PC, thinking that stupid thing froze (in hindsight, I should have waited longer). So now I'm waiting for the motherboard splash screen to show up (DX85SO) and nothing happens.
Stupid thing won't even post. Just a black screen. I try resetting again, and the PC turns on for about 10 seconds and then turns off. When I was overclocking, the board would at least let me know that it wouldn't post and would allow me back into the BIOS. Not this time.
I try this again and again and I finally make it to the BIOS setup, but it freezes while IN the BIOS. After clearing the CMOS and moving the motherboard jumpers (which didn't work until the 5'th time), I make my way into the BIOS and reset it back to stock.
Now it works fine.
Wakes from sleep, and starts properly.
My question is, what's up with overclocking and sleep mode? My only theory is that maybe I wasn't giving it enough power to wake up out of sleep mode (1.2 volts on the cpu). What's even more strange is that when I forced the PC to sleep (start button -> sleep), it woke up fine. It wasn't until it slept 'naturally' that it froze.
Any ideas?
↧
S5500BC
S5500BC board with Micron 36JSZFS51272PZ1G4G1 ECC RAM in all slots will not run at max rated speed of 1333. I do get the three beep code on POST suggesting a memory problem, but the system boots and runs without apparent problems. The 32 GB of RAM seems to be fully recognized. Difficult to read the LED POST codes on boot, but there is a suggestion of a 0xEAh error (Channel Training Error). R0063 BIOS, two X5620's. What should I do to elucidate the problem? Otherwise, the system runs quite well.
↧
Help re-enabling SRT on DZ68BC motherboard
I previously had a 2TB HDD accelerated with a 75GB SSD running fine, but HDD crashed.
I restored backup system image into new 2TB HDD.
Now both SSD and HDD are on same ports as my prior setup (Port0, Port1).
I wish to re-enable SRT on the new HDD.
Checking the MB BIOS, it is set to RAID. But system boots and RST application in Windows no longer has an "accelerate" option. Both drives are listed independently.
Rebooting and going [Ctrl]-I into the RST BIOS, both drives are reported as "Non-RAID Drive". From there, "Acceleration" option reports no drive available. Selecting to "Build new RAID volume" asks me for RAID0 vs. RAID1 vs. Recovery type...neither seemed like the path I expected.
I don't mind restoring HDD again from backup if need to, but how do I get to the stage where I'm able or asked to re-install OS and have the option to turn on SRT?
Thank You!
↧
DX58SO2 will not boot, no video, keyboard or mouse.
DX58SO2 will not boot, no video, keyboard or mouse. Starts up with fans and CD working but reboots after 5-10 seconds. Will boot with SO0920P.bio via cd. Video, keyboard or mouse work and the bios is updated. Same issue on reboot; no video etc.. Tried removing power and battery overnight. Next day, same issue. Any ideas on getting motherboard to boot?
Mike
↧
↧
Whether D915gav motherboard support 500GB hd?
My PC's HD has broken, it cannot be boot up, already test with different HD, confirmed that is the HD problem. It was using WD 800JB HD, but it's difficult to replace the similar HD, I wonder whether the D915GAV motherboard can support 500GB HD or not? Thanks!
↧
How to update the Intel(R) AMT-SOL and the Intel (R) Management Engine Interface?
I have windows vista on my desktop and want to update this to Windows 7, but the Intel(R) AMT-SOL and the Intel (R) Management Engine Interface are not compatible in windows 7.
Can i download the Windows 7 versions of these drivers, can i update them?
Or are these drivers not really needed?
↧
unable to use 4 sticks of ram on dz77ga-70k board. all 4 sticks identical. 2 sticks run fine in blue slots. 4 sticks causes blue screen.
i have two sets of 16gb (4x4) memory sticks. 1 16gb set is gskill and the other 16gb set is crucial. both sets where bought in a set of matching 4x4=16gb.
Using only 2 sticks memory in blue slots works great. Using 4 sticks of memory causes blue screen. This happens with both brands of memory.
↧