Hy, I have this board
and I can't find a driver for PCI Simple Communications Controller.
I tried with all these drivers,
but still don't work.
Please help. Thank you!
↧
I search a driver for PCI Simple Communications Controller
↧
Intel dx79sr bord bios chip damage now motherboard restarting every moment and i want to make this fault please help me soon Thank you
Intel dx79sr bord bios chip damage now motherboard restarting every moment and i want to make this fault please help me soon Thank you
↧
↧
Suche Schaltungunterlagen zum Intel Desktop Board DB815EFV / DB815 EPFV U IMFV24502193 AA A51500-803 für die Reparatur eines Tektronix TDS5104 Oszilloskops
Hallo an die Gemeinschaft
Ich bin neu hier in der Runde da ich mir hier Hilfe erhoffe.
Ich bin als Elektronik Hardware Entwickler angewiesen auf gute Messgeräte.
Leider ist nun mein Tektronix TDS 5104 Oszilloskop ausgefallen.
Ich konnte den Fehler soweit einkreisen, das die Speicherbatterie mit einem viel zu hohen Strom ( 1,4 mAmp.) belastet wird, wenn das Gerät vom AC Netz getrennt wird.
Um den Fehler zu beseitigen benötige ich sie Schaltungsunterlagen des : Intel Desktop Board DB815EFV / DB815 EPFV U IMFV24502193 AA A51500-803 für die Reparatur.
Ich hoffe mir kann jemand damit weiterhelfen, damit ich das ansonsten voll funktionsfähige Oszilloskop nicht aufgeben muß.
mit Grüßen
Goggoly
↧
DQ77MK - RAID array not supported on latest RST-Driver?
Hi guys,
After a couple of years of stable operation of a raid10 (4 x 2TB) array off of the onboard controller and no memories of issues upon installation at the time, I recently upgraded my Windows Homer Server 2011 storage capacity to 4 x 3TB. After having created the array upon boot (CTRL+I) I ran the installation of Windows Home Server 2011 and got ready to F6 my way through the installation process.
Unfortunately, this did not work quite as well as expected...
When it came to partitioning the installation target, the installation routine at first showed me 2 of the 4 (?) connected disks at the wrong capacity of 750GB each (WD Red, 3TB). Once I browsed my way though to the location of the freshly downloaded driver, setup displayed only one storage entity at the proper capacity of 5,5TB. So far all looked quite well, but as soon as I hit the 'Next' button I received an error message, stating, that my HW was not compatible with the driver provided...?
I am running the board at the latest BIOS (v.0071) and was using the F6-driver file available at Download RAID: Intel® Rapid Storage-Technologie-Treiber für Intel PC-Mainboards.
Can anyone that point me to the right F6 driver for Windows Home Server 2011?
Thanks
Thomas
↧
I have a Intel DH61SA board and performed a bios update to ver 0048 and then tried to update it to 0099. The update was successful but the system kept on booting into the bios. After following instructions to remove jumper and replace jumper the system ke
I have a Intel DH61SA board and performed a bios update to ver 0048 and then tried to update it to 0099. The update was successful but the system kept on booting into the bios. After following instructions to remove jumper and replace jumper the system kept booting in the bios, after that it booted up to a screen that was filled with Intel writing all over the screen, booted down and that was the end of it. System no longer boots up to any screen, no logo, bios, bootup keys nothing. I tried the various recovery options but non seems to work. Please advise accordingly if there is a fix or if i should start looking at another board? Thank you
↧
↧
I have a Intel DH61SA board and performed a bios update to ver 0048 and then tried to update it to 0099. The update was successful but the system kept on booting into the bios. After following instructions to remove jumper and replace jumper the system ke
I have a Intel DH61SA board and performed a bios update to ver 0048 and then tried to update it to 0099. The update was successful but the system kept on booting into the bios. After following instructions to remove jumper and replace jumper the system kept booting in the bios, after that it booted up to a screen that was filled with Intel writing all over the screen, booted down and that was the end of it. System no longer boots up to any screen, no logo, bios, bootup keys nothing. I tried the various recovery options but non seems to work. Please advise accordingly if there is a fix or if i should start looking at another board? Thank you
↧
Intel DX58SO won't post after upgrading GPU
Hello, I just switched out my GTX460 for a Radeon R9 380, now my Pc hang at the BIOS screen before posting. I tried putting the jumper on different configuration with no success. I took out the battery for a few minutes, nothing. It just display the Intel screen, I can't even press F2 to go into setup. Help:
EDIT: Updated Bios, everything boot right away
↧
DH61AG will not output to external GPU.
I have the following GPU: http://www.hisdigital.com/un/product2-675.shtml
And while connected, I cannot get any video output from this.
However, if I set the Motherboard into BIOS into (2-3 Configure Mode) then I do get Video output and the GPU is detected in the PCIe Slot..
In normal mode, I don't see anything, not even POST.
I have no idea what else to do here.
↧
I have a Intel DH61SA board and performed a bios update to ver 0048 and then tried to update it to 0099. The update was successful but the system kept on booting into the bios. After following instructions to remove jumper and replace jumper the system ke
I have a Intel DH61SA board and performed a bios update to ver 0048 and then tried to update it to 0099. The update was successful but the system kept on booting into the bios. After following instructions to remove jumper and replace jumper the system kept booting in the bios, after that it booted up to a screen that was filled with Intel writing all over the screen, booted down and that was the end of it. System no longer boots up to any screen, no logo, bios, bootup keys nothing. I tried the various recovery options but non seems to work. Please advise accordingly if there is a fix or if i should start looking at another board? Thank you
↧
↧
RAID Screen...
Hello guys I need some help please. I installed a second hard drive on my Windows 10 desktop and ever since then, upon restarting I get a RAID screen for a few seconds asking me to click CTRL I to inter RAID configurations. This does not happen when I unplug that hard drive and only run on the main hard drive. I'm able to see the hard drive and move files in it. How do I get rid of this screen from showing up? I don't even know what a RAID is and honestly, if I don't need it, I don't want it. Please help. Thanks in advance!
↧
DH87RL
Our intl DH87RL mother board does not display. we are unable clear the cmos. how to clear the bios. AND get the display
↧
Skylake processor compatible with GA-Z170MX-Gaming 5
What Intel 6th gen (Skylake) processor is compatible with a Gigabyte GA-Z170MX-Gaming 5 motherboard? I searched all the Intel 6th gen processors for compatibility and this board never came up in the results. Thanks
↧
DH61AG - Unable to enter BIOS - Blank Screen - v109
So, I had an issue with my GPU, and I was informed to update the BIOS.
Upon doing so, I can no longer enter the BIOS to do anything at all.
I was originally on 040, then I went to 099, then to 109.
Things that I have tried.
- Clear BIOS by removing battery for 10 minutes.
- Re flashing back to 109 via the system recovery.
- Managing the BIOS via the 2-3 Jumper configuration.
Here is a photo of what I see.
At this point, there is nothing I can do, no keys do anything, and I am forced to reboot the computer.
---
Any help would be greatly appreciated.
Thanks!
↧
↧
eSATA port multiplier support on DH67CF board / H67 chipset
Hi everyone,
I apologize for not being terribly technical.
I plugged in a 5 bay SATA drive into the eSATA port on my DH67CF motherboard running Windows 7. The computer is only seeing the first of the five bays. I know that port multiplier support is required to see all of the drives, and I am a little bit surprised that the latest and greatest Intel chipset wouldn't support this technology....am I missing something? Is there a way to see all of the drives? I know I could put an external eSATA card into the slot, but I'd rather save the PCI slot for other purposes if I can.
Thanks if anyone has any ideas on this -- through BIOS updates, settings, hacks etc...?
↧
Intel DP67BA or DP67BAB3. Do they have the ability to raise cpu ratio to overclock i5 2500k?
I want to buy Intel DP67BA or DP67BAB3. But i don't know they support overclocking or no?
↧
Need manual for d945gbi to upgrade processor
Looking to upgrade my Intel Pentium D CPU 830 3.0 GHz processor to the latest; the board is an Intel Desktop D945GBI. Does/Did anyone else have the similar hardware and was successful in upgrading the processor?
Thanks in advance.
Wayne
↧
Flash BIOS update failing on D945GNTL
We use an Intel D945GNTL along with P4 631 "Cedar Mill" processor for customized OS/2 operating system computers. The place we source the boards and CPU's from this last time sent us ones with customized BIOS's that will not accept the flash upgrade to the latest BIOS version. I have tried updating with both the bootable ISO image, and also the BIOS recovery floppy methods. Both fail with the same error message.
I had thought that BIOS version 4119 was the latest for this board, however while searching for a way to make the board accept the BIOS update, I found that version 4131 has been available.
I updated to that 4131 version from the 4119 on another like system we have without the customized BIOS splash screen. It successfully upgraded from 4119 to 4131.
Perhaps since the splash screen was customized, is that preventing updating the BIOS version?
Any other suggestions?
Flash BIOS update error screen:
The customized BIOS splash screen:
BIOS Flash update working on another same system we have:
Usual BIOS splash screen on the system which accepted the flash update from 4119 to 4131:
I am thankful,
Michael Lueck
Lueck Data Systems
↧
↧
HELP ¿As I do to restore the BIOS address BOARD DB85FL please?
I have a problem with the Board DB85FL, mistakenly modify the BIOS at boot time and can not find the address of the BIOS does not allow me to enter the BIOS. As I do to restore that BOARD please.
↧
Does Intel DP67BG supports overclocking of 3770K ?
Hello everyone, i am coming to you with a rather specific question.
The base of my gaming computer consists of Core I5 2500k procesor on an Intel DP67BG extreme motherboard together with 16 gb of ram and Nvidia 780ti in SLI. BoardRam and CPU are all 4 years old and are still serving me vell till this day and until lately they runn everthing like new. But in last yer processor started to show its age in games and despite being Oc to 4,5 Ghz in started to show some lag in new game like in areas full of people in Far Cry Primal. I was thinking of putting in an I7 3770K as it is superior in never games that now finaly use HT. It would be a cheap upgrade because I will still have my I5 to sale and they still sell for a decent price. But I worry if this board will actualy support overclocking of never 3770k ? I know it supports it but intel has been tricky on their motherboards and I dont want to buy an I7 only to find grey OC options in bios. And I am using the latest version. And overall is there even a point of getting 3770k to replace 2500k or should I got 6600k/6700k, 16/32 gigs of DDR4 and an Asus Z170 pro motherboard and maybe call it a day for next 3-4 years ?
↧
Intel DP67BA or DP67BAB3. Do they have the ability to raise cpu ratio to overclock i5 2500k?
I want to buy Intel DP67BA or DP67BAB3. But i don't know they support overclocking or no?
↧