Quantcast
Channel: Intel Communities : Discussion List - Desktop Boards
Viewing all 4926 articles
Browse latest View live
↧

DZ77SL-50k problem

July 25, 2012, 2:29 am
$
0
0


Hi

 

Sorry for my poor english as first. There is my problem.
yesterday i build new system with

-Intel Dekstop Board DZ77SL-50K
-Intel Core i7 3770k

I installed Windows 7 Home premium 64 bit. and everything works fine until today. I parchused one Radeon HD5450 video card. I installed the latest drivers for her , and everything was fine. Then i tryed to install  the Virtu software , because i want to run both graphics adapter. When i click on the setup , it says "No sandy bridge , or Ivy bridge video adapters found , please.. et.c." As usual i think , the system cannot find my integrated HD 4k Graphics. I shutted down the system and move the HDMI cabble from HD5450 into the motherboard . Power up , and no screen . Then i moved cabble back to HD 5450 and screen is shown up. I shuted down the system and go into BIOS. (The BIOS is worked on default , and i am not overclocking the machine yet!) I went to Video configuration settings in BIOS , and i saw that the Primary video Adapter is set to "Auto" , I suggest that System runs on Discrette video first if settings are set to Auto. I change it to Internal Graphics , or i cant remember , i chouce the Second Options i think. Then i click F10 to save and restart. After restart no screen shown up on Integrated Video adapter , also on Discrette. I removed the New video card and i tryed only with Integrated , but no succes. As standart procedurre , i changed the Jumper on the motherboard on "Config" and same problem , no screen . I tryed everything to resset this BIOS Settings back to Auto , but fail. I remove the CMOS Battery for 1 Hour , then i tryed again , fail. I tryed every suggest from Intel Step for Resseting the BIOS , but no succes. Pls can you tell me what to do , to resset this BIOS , i am not tryed to recovery him yet, because i dont want to do that. The machine using the latest bios , i updated him yesterday.
Best regards and thx for anyone who helped here.

↧
Search

Ethenet no reconocida. Motherboard DZ77SL-50K

April 18, 2013, 10:52 am
$
0
0

Hi all

I'm with a problem in a DZ77SL-50K not recognizes the network card.

The drivers are the latest that I found on the site

The operating system is server 2008 R2 standard

The bios is enabled LAN

The message during the installation of the drivers says no network cards installed.

The drivers I've tried both 64 and 32 with the same result.

Thank you very much for the help you can give me.

 

 

 

 

regards

↧
↧

DQ45CB Ram Question

December 31, 2014, 4:06 am
$
0
0

Can,I,use,1.8,v,and,1.9,v,ram,(same,size,and,speed),in a DQ45CB MB,together if I set the voltage to Auto?                                                                                                                                                                  Auto settings,are,1.8,,1.9,or,auto),

Then,place,them,in,pairs (same,manufacture,and,voltage,together In,primary,1.8,volt and,the,1.9 volt sticks in the secondary slots).

↧

Desktop board DQ965ss / DG965GF

July 17, 2014, 6:46 am
$
0
0

Desktop board DQ965ss / DG965GF has a red light when switched on. Can anyone help. Remember, no display, but the CPU fan turns on.

↧

Enables individual SATA ports to be enable or disabled as needed ???

November 7, 2014, 3:22 am
$
0
0

Dear Support,

 

Why doesn't exist this option???

 

In this pdf You told that this option is available but it's not true

 

http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/q87-q85-chipset-brief.pdf

 

SATA Port Disable Enables individual SATA ports to be enabled or disabled as needed. This feature provides added protection of data

  by preventing malicious removal or insertion of data through SATA ports. Especially targeted for eSATA ports

 

In the bios there isn't an enable/disable option by sata ports individually, you can only enable/disable the hot swap capability.

 

Anybody who agree with me please share this request in other forums too because this feature uninplemented still yet.

 

With Best Regards

 

Andras

↧
↧

DH61AG , please help resurrecting video output back to IO-panel

January 2, 2015, 2:28 am
$
0
0

Hi,

please help me to redirect the video outpt to the ports located on the IO-shield.

A year ago I have had messed up , playing with settings related to the default video output.

If I remember right it was the LVDS-port I have had set to default.

I have no video output anymore with the regular display(VGA,DVI,HDMI).

After powering up I can see activity on the led's and an inserted USB-stick.

As of the the time the working BIOS  was 00104.

 

Board ID: BTYG23100RFX AA G23736-504

CPU:Core i3 3225 resp Core i3 2100

 

Thanks in advance.

↧

DZ86BC: with BIOS 0042 continuously restarting

January 17, 2014, 4:29 am
$
0
0

After an update from 0039 to 0042 the board did not pass the POST anymore. I disconnected all unnecessary hardware, reseated memory, with no success. No chance to enter the firmware settings. Port 80h code before restarting was E6.

After a recovery BIOS downgrade to 0039 everything was fine.

So what is the problem? Buggy BIOS? Hardware failure?

↧

Buenas tardes, habrá alguna motherboard que acepte 2 fuentes de poder.

January 2, 2015, 9:48 am
$
0
0

si existe, por favor indiquen el modelo de la motherboard.

↧
Search

motherboard intel

January 2, 2015, 10:24 am
$
0
0

alguien me podría indicar que motherboard soporta 2 fuentes de poder.

↧
↧

Does not display for the fist time when powered on

January 1, 2015, 10:24 pm
$
0
0

I am system integrator, i am facing problem with Desktop board DB85FL with Core I7 4770. When i power on the system fist time i don't get display,

after i remove & put the power cord again & power it on, it is normal for the whole day: irrelevant of how many times turned off & on. I am using Transcend

Ram (1600Mhz, (2R/512Mx8/CL11) 8GB * 2. I had sold the Same configuration a couple of months back, the same problem persists in that also. I have

tried changing the SMPS & also I have ungraded the BIOS, but the same problem persists.

↧

Dúvida sobre memória para MB DX79SR com processador I7-3960x

January 2, 2015, 4:18 pm
$
0
0

Olá pessoal, tenho uma DX79SR com um I7-3960x e gostaria de saber quais módulos de memória são compatíveis para ampliar a memória, primeiramente para 32GB e depois para 64GB?

Estava avaliando o kit HX318C9SRK4/32 ou HX324C11SRK4/32. Alguma sugestão? Gostaria de comprar os corretos até pelo custo, porém olhando manuais não consegui chegar em uma decisão.

Alguém com conhecimento da placa e experiência poderia compartilhar?

 

Obrigado,

 

Dilson.

↧

Upgrade Motherboard

January 2, 2015, 5:19 pm
$
0
0

For, motherboard D102GGC2, should I upgrade the memory to the 2GB before looking to a different cpu?

Any suggestions for cpu , am not vary computer smart.

thx.

↧

PIC-E card on DH55TC

January 2, 2015, 5:57 pm
$
0
0

I have desktop Board DH55TC. I recently installed PCI-E card X-4143 for USB 3.0. Since I installed this card, Windows-7 automatically restarts after shut down. Is this card compatible DH55TC board?

When I disable this card in device manager problem disappears.

Any suggestion on what may be causing this problem.

↧
↧

VMware ESXi 5.5 hangs on ACPI initialization on DQ67OW

October 20, 2013, 4:44 pm
$
0
0

Hi,

 

I'm using a DQ670W motherboard as a VMWare ESXi whitebox for my personal use. It works great with ESXi up to 5.1U1.

ESXi 5.5 has been released but it hangs on ACPI initialization on startup or install. Searching on google, other brands of motherboards are facing the same problem, they released a new BIOS update to make ESXi 5.5 work even if their motherboard are not officially supported by VMware.
Is Intel aware of this problem ? Will a BIOS update be released ?

I can provide technical information for investigation.

 

Rene

↧

DH61AG | new gen. Bios 105 breaks TV Card recognise

May 22, 2013, 1:48 am
$
0
0

We are developing digital Signage Systems using the DH61AG. Since 2 Years we are build System with the
same HW.

 

On two of my test systems Installed the new Bios gen 105. (Update from old gen 45 to 99 transition,104,105).

Since that day the bios has problems to recognize and initialize the TV Tuner Card stable. some time it
works, sometimes the card is not detected and not visible in the Bios. it’s a try and error game with power on / off

 

Both system where in the lab for over 1 year without any problem detecting the PCI-E Tuner Card (heavy daily use)we didn’t touch the HW from

the system for over one year, only the bios update was done. since that, I observe on both system the same behavior.

it is not the Tuner HW Card, its definably some changes in the Bios.

 

Unfortunately  it’s not possible to downgrade to 45 Bios Version, so the system are broken at the moment.

 

Does any one else run into this issue ?

 

Intel please help and fix it in the next Bios.  (106 ?)

 

Thx.

↧
Search

TARJETA DE VIDEO GE GORCE

January 5, 2015, 11:12 am
$
0
0

que motherboard me recomiendan utilizar para la tarjeta de video ge force 780 3gb gddr5

o que características debe cumplir la maquina para soportar la tarjeta de vídeo ge force

↧

Right Click on Desktop causes Delay because of igfxsrvc.exe

November 5, 2013, 10:34 am
$
0
0

Hello,

 

the process igfxsrvc.exe is apparently part of the Intel Common User Interface and in use/started when I perform a right click on the desktop which causes an annoying delay of about 2 seconds while opening the context menu.

 

What is that process for?

Can I disable it or is there another way to avoid the delay?

 

OS: Windows 7 64 bit Home Professional

Graphics Driver: 15.31.17.64.3257

Motherboard: Intel DQ77KB (processor i3 3220)

↧
↧

DZ77SL-50K How do you configure Secure Boot options?

December 30, 2014, 6:05 pm
$
0
0

Does anyone have any documentation on how to configure Secure Boot?

 

I'm looking for specific steps on how to get the UEFI interface to load keys. You can put a check box by Secure boot but not check any of the other options.

 

I once found the steps here in the forums but no longer can I find the posts.

 

I also found online a nice site that documented the Visual BIOS but it was older and did not cover Secure Boot.

 

Is there no documentation on the Intel site on how to correctly configure Secure boot?

 

I've found how to install Windows 8/8.1 but no real articles on the correct procedure to setup secure boot.

↧

whether DH55HC supports windows 7 64bit

December 24, 2014, 8:28 pm
$
0
0

I have DH55HC Intel motherboard with bios version Intel Corp. TCIBX10H.86A.0035.2010.0429.1516.I am not able to install any windows operating system using SONY DVD RW DRU-870S ATA Device .I have connected  same hard disk and  dvd writer to asus motherboard with same dvd window 7 32 bit..Iam able to format .Is there any issue with biosdh55hc.png

↧

DH67BL upgrade BIOS to v160 and now gives checksum error

December 8, 2013, 2:26 am
$
0
0

I just updated my DH67BL's BIOS from (I think) v146 to the latest which appears to be v160.  I updated the BIOS using the F7 method.

After upgrade, at each boot I get a now checksum warning error - which I didn't get before.  Apart from this warning nothing else seems amiss (after only a few minutes of use).

 

I have tried downloading the BIO file again and redoing the upgrade, but it doesn't change anything.  I tried clearing the event log in F2 setup.  But it keeps reappearing.

 

I cannot find any other indication here that anyone else has seen this as a problem.

 

The only change I have noticed with this release is that it respects the settings I made for a primary monitor (the previous version assumed it knew which one the primary monitor was).

 

Where do I go from here to fix the issue?

Do I need to fix the issue?

↧
Viewing all 4926 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>