Quantcast
Channel: Intel Communities : Discussion List - Desktop Boards
Viewing all 4926 articles
Browse latest View live
↧

DH61WW No display after BIOS update

December 28, 2015, 8:30 am
$
0
0

Hello everyone,

I have an old desktop that i decided to upgrade so it could be put into good use.

I checked the specs and so on.

i5 and 4Gb ram 1TB hdd Windows 10

Then i decided to get an ASUS R7 240

When i plugged it in, no display was showing

So i assumed it must be the Motherboard. The motherboard is Intel desktop board DH61WW

The psu is a ccivo 500w (24A for the 12V rail)

Therefore i started updating the BIOS from 0016 to 0048 as it is showing in this link

Download BIOS Update [BEH6110H.86A]

However i faced a problem something related to the Intel ME needs to be updated from 7.x to 8.x

After researching it turned out alot of people were impatient and they updated the BIOS to 0099 and then the pc would not boot, afterwards they flashed the 109 and everything was fine.

So i did the same, updated to 0099, and now my pc would not display at all.

The problem is, to access the BIOS recovery, i need to remove the Jumper which is in 1-2 position (normal position) to access the recovery.

When i remove it, still nothing shows up on the display, and i cannot flash the 109 now

I need to fix it, could it be my monitor?! (Viewsonic VX-2270SMH)

i followed the steps from this forum also

DH61WW BIOS update problem ???

Flashing BIOS was way easier on my ASUS MAXIMUS VII HERO, but this intel board with the jumper and so on, i dont know what to do

Would Appreciate your help

I read on this thread Re: PB bios 0099 Carte mère DH61WW that he can access the BIOs by pressing F2, should i try that even if nothing shows on screen while normal booting?!

Merry Christmas

↧
Search

PC fährt nicht mehr hoch

December 30, 2015, 12:50 am
$
0
0

Hallo zusammen,

 

hoffe es kann mir jemand helfen. Habe das DH87MC Destop Board und habe eine alte Gainward GTX560 eingebaut. Beim Anschluss bleib der Rechner schwarz. ( er erkennt also die GK nicht)

Wenn ich meinen Monitor allerdings über den Board DIV Anschluss starte komme ich ins BIOS und könnte Win7 starten (Neuinstall).

 

Jetzt habe ich durch gefährliches halbwissen im Bios (weiss leider nicht welches BIOS) unten den Einstellungen :

 

Grafik von :  Enable if Primary auf Always Disable

Video von :  Auto auf PCI

 

gestellt.

 

Danach machte er nur noch 2x 2 Piepgeräuche hintereinander und ich komme gar nicht mehr ins Bios.

 

Habe es dann mit dem Jumper versucht zu Reseten , ohne Erfolg.

 

 

Ich hoffe es kann mir jemand weiterhelfen.

 

vielen DAnk im voraus.  gruss Tim               

↧
↧

on board audio driver problem

December 26, 2015, 12:12 am
$
0
0

Dear sir,      I have been searching for Intel motherboard dq965gf drivers  I have xp sp3  my audio doesn't works for 8 months there is always yellow mark on Microsoft uaa bus for hd audio it's Id is ven-8086, device-284B and it shows version 5.10.0.5010  and shows error 10.I have done every thing downloaded idt driver from Intel site allos v1005 pv. exe bus it says hardware not recognised and many problems I also updated my bios and chipset but it doesn't work please help me and give me solution sigma tel driver also doesn't and also installed hotfix kb888111 and nothing happens please help me I am tired of trying how I remove this yellow mark

↧

reclama sobre garantia

December 30, 2015, 11:19 am
$
0
0

fazem 2 meses que estou esperando minha placa mãe da Intel e ate agora nada acho isso um absurdo , para uma empresa desse porte o numero do pedido foi 7501822222 ate agora nada vo passar o finm do ano com uma carroça de pc por causa da intel

 

↧

DZ87KLT-75K With G3258 CPU Cannot Change Multiplier

December 30, 2015, 8:20 pm
$
0
0

I am using a G3258 Processor in a DZ87KLT-75K motherboard. Bios is current. Cannot change multiplier. Processor is unlocked from Factory. Very strange. Wondering is it is non-compatible. 

↧
↧

intel dz77ga 70k led code 09

December 27, 2015, 5:31 am
$
0
0

intel dz77ga 70k led code 09 cant find any infore what that is tryed to rise the volt on cpu for my ram emp to 1600 fsb hit f 10 saved rebooted now no video i took the batt out reset bios jumpers the back bios button nothing worked to get video back i unplug everything no luck any ideas let it set over nite unpluged still same

↧

DZ68BC with BIOS 28 and having problems. Please, I need some help.

December 10, 2015, 4:43 pm
$
0
0

Hello Intel Team and experts here.

 

Well, I have a computer I made about 3 years ago with Intel DZ68BC  with BIOS 28

Intel i7 2600k

Kingston memories 16 gigas ( I used the ones on the intel motherboard list )

Windows 7 PRO 64 bits.

SSD intel 510 series 120 gigas.

Power supply Corsair 850 w.

 

The fact is my computer never worked well.  I spent a lot of money to buit it. The computer looks like wants to frozen all the time, sometimes when I'm typing text gives me the impression that fought for a second and then skips letters.

When I use simple 3D features, OMG, it is a caos, even using my AMD HD 7970.
Even the SIMPLE second life www.secondlife.com that works perfect on INTEL IRIS, it frozen in my system with a powerfull videoboard as 7970, the best before the R9s ones.

PLease, I need a solution.

 

WHAT IS the best BIOS for this motherboard? The one I HAVE? 39? the latest? PLease user, please Intel, Please experts, I really need a help. please.  I am suffering with it.

 

 

What I need for this machine works better?  Should I update the bios? there any BIOS stable and better then the BIOS 28 ??
I will use the same hardware I described

↧

I can't access BIOS on DH67BL: keyboard unresponsive?

December 31, 2015, 12:42 pm
$
0
0

I'm trying to access BIOS on DH67BL, using a Microsoft Natural Ergonomic Keyboard 4000 in a USB 2 port. Hitting F2 for Setup does nothing, neither do F7 or F10 (which are supposed to be BIOS Setup, BIOS update and Boot Menu, respectively). I'm sure I have been able to access BIOS before on this motherboard; but I'm not sure if I have been able to access it with this keyboard. I have no other keyboard for testing. Once the operating system loads the keyboard is fully functional again.

 

I have tried setting the jumper for BIOS maintenance mode: that opens up the maintenance mode, but there's no keyboard functionality there either so I can't make any changes or even view the settings. I also have tried removing and replacing the battery to restore default settings in case I have inadvertently previously changed something in BIOS: the clock was reset, but apart from that no difference (well, the computer didn't boot up properly then - fans turned but no signal to the screen - after that. Until I reset the jumper for BIOS maintenance mode and then back to normal, and now it boots up tnormally, but no difference where I was trying to make one.)

 

I'm thinking it could be an issue with the keyboard, but I can't test that now. What else could it be? How to fix or get around this? For now, I just want to set my new SSD as the first boot option, but in the end I really should be able to access BIOS anyway.

↧
Search

Failed to update the chipset of my Intel Desktop Board DB85FL. What sould I do?

January 1, 2016, 11:45 am
$
0
0

Failed to update the chipset of my Intel Desktop Board DB85FL. What sould I do?

↧
↧

Beep Code for Intel Desktop DP55WB mother board

January 3, 2016, 7:13 am
$
0
0

A custom built (older computer) just started having the following problem:  On boot up, no graphics, and the following beep code 2-1-1-1

I swapped memory around with no impact.

The processor is a i7-860 (LGA1156)

The graphics card is a NVidia GEFORCE GT610 which was replaced in Jan 2013.  I haven't tried swapping it out until I understand the beep code.

 

Thanks for any suggestions.

↧

I7-2600s what board do I buy

January 3, 2016, 7:37 pm
$
0
0

Hi. I had a Acer all in one. It died. I have a Intel i7-2600s sr00e 2.8ghz processor. Was wondering if I could purchase a motherboard for this processor to go in a desktop tower.  Any help would be great Ta.

↧

Current System is not an Intel(R) Desktop Board (A044412A)

December 8, 2011, 11:10 pm
$
0
0

Hi,

 

I have a Intel Core 2 Quad processor based system Desktop, having Intel Motherboard Model :- DG41WV.

 

Recently I upgraded my system BIOS from Intel website.

 

Today I was trying to update my Audio Driver from the Intel Driver CD / DVD which came with the Motherboard. But the Intel Express Installer is giving the following error :- "Current System is not an Intel(R) Desktop Board (A044412A)".

 

When I run the Board CD Tool (BoardID.exe) but it does not show the Model No. and Version No. of the Board.

 

Please find attached herewith the screenshots of the errors.

 

Please help to get rid of these errors.

 

Intel Express Installer Error-2.jpg

Intel Express Installer Error.jpg

Board ID Tool Error.jpg

CPU-Z1.jpg

CPU-Z2.jpg

↧

Management Engine drivers 7.0.0.1144 for DZ68BC and 7.0.0.1118 for DH67BL

January 6, 2016, 6:45 am
$
0
0

I am collecting device drivers for safekeeping. The only ones I cannot find are Management Engine 7.0.0.1144 for DZ68BC and 7.0.0.1118 for DH67BL. I searched on intel.com but found nothing. Intel Downloads has 8.1.0.1248 and 8.1.0.1252, with these including support for both 2nd and 3rd Generation CPUs, but I'd like to find the ones for only 2nd Generation. I know they exist because Windows Update offers them. Will Intel support please post links to them?

 

UPDATE1: I found an Intel link for 7.0.0.1144, but the bottom of the page states that it is only for DZ68PL and DZ68AF. I assume I can use this for DZ68BC because there wouldn't be two 7.0.0.1144 updates, right? Download Intel® ME 7: Management Engine Driver for Intel Desktop Boards

 

UPDATE2: Why can't I search on the update number? Searching on 7.0.0.1144 at intel.com returns nothing, even though it exists.


UPDATE3: Dell has 7.0.0.1118 at Intel Management Engine Interface Driver Driver Details | Dell US. Would Dell have added anything Dell-proprietary to it as it often does? At a minimum, Dell changed the icon. I'd prefer the Intel original.

↧
↧

intel desktop board DH67BL is compatible with windows 8.1?

January 6, 2016, 10:23 am
$
0
0

intel desktop board DH67BL is compatible with windows 8.1? once i have installed win 8.1, but it is not working properly, but with windows 7, 64bit os it is working smoothly, pls can anybody help me regarding this...

↧

intel desktop board DH67BL is compatible with windows 8.1?

January 6, 2016, 10:24 am
$
0
0

intel desktop board DH67BL is compatible with windows 8.1? once i have installed win 8.1, but it is not working properly, but with windows 7, 64bit os it is working smoothly, pls can anybody help me regarding this...

↧
Search

Ram 1866 wont boot

January 6, 2016, 9:58 am
$
0
0

Motherboard: Intel DZ77BH-55K
CPU: i5-3550 Stock clocks
GPU: XFX 7870 Double D
Ram: 2x8gb 1866 DDR3 Ripjaws - F3-14900CL10D-16GBXL

 

 

I have updated the bios to the most recent via the Intel website. I have tried utilizing both XMP profiles and neither will boot. I have tried inputting the timings manually and it still wont boot at 1866. The only way I got it to boot in 1866 was with manual timings and 1.55v The problem with this is it was unstable and had 700+ errors in memtest86 and hung at test 6. It can't even get through all the tests.

 

Anyone had experience with similar issues on these RAM. Am I SOL and have to live with it at 1333?

↧

intel desktop board DH67BL is compatible with windows 8.1?

January 6, 2016, 10:18 am
$
0
0

intel desktop board DH67BL is compatible with windows 8.1?

↧
↧

Intel DP35DP m/b with Core 2 Duo E8600

January 5, 2016, 10:25 am
$
0
0

Hello!

I installed in motherboard Intel DP35DP processor E8600. The processor is correctly defined and passes all tests. However, a warm restart is not working. Any ideas?

↧

TSC calibration error (Linux, DX79SR + 3930K i7 )

January 5, 2016, 1:40 pm
$
0
0

I have an linux box (Red Hat 7) that doesn't quite work.  On boot, I get a error stating that "Fast TSC calibration failed."  According to google this seems like a common and harmless error, but it locks up my machine and the bootup doesn't complete.

 

Is there a way to test my hardware (CPU, motherboard, ram) to see if my hardware is faulty?  I've just upgraded the bios in the DX79SR to be the most recent version available, and it seems functional.

 

The DX79SR has lots of overcloacking features that I'm not interested in using.  Could an errant BIOS switch choice be the sort of this problem? 

 

Any suggestions appreciated,

 

Nathan

↧

dz77re-75k won't post led error 32 with 3 beeps

December 4, 2015, 11:12 am
$
0
0

Hi

 

I bought this board to replace ASUS, CPU 2600k tried 3 diff configs of 16G DDR3, 1333, 1066. I understand the limits of the 2nd Gen Procs but won't post!

 

1: 3 beeps and  error code 32 ? not listed anywhere

2: Status LEDS blink green MEM while beeping, flashes red HOT then shuts off

 

I disabled or disconnected video card ASUS 6950 and 1 add on eSata adapter

 

Do I need to return this board? I know it is older board without support but anybody else worked through this?

 

Thanks in advance

↧
Viewing all 4926 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>