Does the DP55WG motherboard have internal support for bluetooth? I am new to the community and I apologize if this a dumb question - but I reviewed the Intel literature and I find no mention of bluetooth - so I am assuming I must purchase a dongle or some other device to get bluetooth to work.
↧
Does the DP55WG motherboard have internal support for bluetooth?
↧
Why can't I get the audio driver to install?
I've asked this question before and thought I fixed it, but the problem returned.
I have an Intel desktop board model # D510MO. Board number is AAE76523-404. It's running Windows 7 Ultimate 32 bit. I can't install sound drivers on it. The Intel driver update utility doesn't produce anything. I've downloaded the correct drivers from Intel download, but they don't work. It goes through the installation process, reboots, then there's no audio device installed. I've installed the chipset driver and updated the bios.This is the page I got my instructions from: Desktop Boards — Audio Drivers Do Not Install. I've done this several times.
[Correct Answer by Mark Fraylick on Feb 23, 2015 3:21 PM
I finally got it. I disabled audio in the bios. Then reinstalled windows. I enabled audio in bios and installed the driver.]
This worked one time. On the next reboot, the problem was back. There's no audio device installed. I've since done it twice more the same results.
Mark Fraylick
↧
↧
How do i install Network Adaptor for Intel dh87rl Motherboard for Oracle linux operating system
I'm trying to install Oracle Linux software for my Pc which is having dh87rl motherboard. After installation my Operating system could not able to Detect the network Adapter automatically. how do i find the same.?
↧
PXE-E61 & PXE-M0F Errors While Booting
I am receiving the following errors while booting my desktop:
PXE-E61 - Media test failure, check cable
PXE-M0F - Exiting Intel Boot Agent
As mentioned below, I have disabled network boot feature. I have also tried replacing the SATA cable and port. Finally, I tried to update the BIOS version to 0103. But for some reason the update is NOT happening. I press F7 to update BIOS, follow all the subsequent steps and press ENTER in the last step to update BIOS. At this moment, my computer (or BIOS) stops responding. By god, the current version does not get corrupted, but the point is that BIOS update is just not happening for reasons unknown to me.
Please help!
System Information:
BIOS Version : EBH7710H.86A.0053.2012.0213.1543
Processor Type : Intel Core i5-3550 CPU
Product Name : DH77EB
Version : AAG39073-304
Serial Number : BQEB229002LB
Intel Management Engine Firmware : 8.0.1.1399
SATA Port 1 : WDC WD5000AZRX (500.1GB-6.0Gb/s)
Boot Drive Order: [P1: WDC WD5000AZRX-00A8L]
The following options are disabled:
Boot to Optical Devices
Boot to Removable Devices
Boot to Network
UEFI Boot
Fast Boot > General Optinmization is enabled
Regards,
Akash
↧
Super I/O overheating 125°C
I bought my PC a year back, it configuration is
Core i7 4770
2*8GB 1600Mhz crosair RAM
Zotac nvidia gtx 760 GPU
DH87MC motherboard
2TB HDD
UMAX 700W PSU
The problem is that the Super I/O is overheating and its temperature is over the threshold. The temperature of Super I/O is 125°C. I checked this in Intel desktop utilities and also in virtual BIOS.
PC all of a sudden got powered off and then it didn't boot up at all not even BIOS. If I press the power button the PC powers ON for about 3 seconds and then gets switched off. And so I opened the CPU cabin and noticed that there were two LEDs ON, RED and GREEN. The Red one is for POWER FAULT. I removed the power cable and after sometime I put it back. And that RED LED is OFF. After that the desktop utilities popped up and showed me about the super I/O. How to solve this problem. The PC boots and works but I have noticed its performance is reduced at least by 25%. Please help
↧
↧
PCIe server card PCIe TPH problem
Hi all,
I buy a server networking card I210.
It has a PCIe advance feature TPH (TLP Processing Hints).
But I don't find the Intel chipset or motherboard's pcie port could support this feature.
I want to try the TPH efficacy.
Could any expert help me to give me the Intel chipset or Intel motherboard model name that support TPH?
Thank you very much.
↧
Why doesn't the sound driver install?
I have an Intel desktop board model # D510MO. Board number is AAE76523-404. It's running Windows 7 Ultimate 32 bit. I can't install sound drivers on it. The Intel driver update utility doesn't produce anything. I've downloaded the correct drivers from Intel download, but they don't work. It goes through the installation process, reboots, then there's no audio device installed. I've installed the chipset driver and updated the bios.
↧
Motherboard Intel® (DN2800MT and other) doesn't boot with All DVB and Video Capture card PCI-e inserted
My test motherboard Intel® DN2800MT with BIOS Update Version: 0171 Date: 01/01/2015:
1) DN2800MT doesn't boot with DVB card DVBSky T9580 PCI-E inserted (PCIe bridge DVB card: Conexant CX23885)
2) DN2800MT doesn't boot with Hauppauge ImpactVCB-e Analogue Video Capture PCI-e Card inserted (PCIe bridge: Conexant CX23885)
3) DN2800MT doesn't boot with COMPRO VideoMate E800 TV PCI-e Card inserted (PCIe bridge: Conexant CX23885)
4) DN2800MT doesn't boot with DVB card TBS6981 PCI-E inserted (PCIe bridge DVB card : Conexant CX23885)
5) DN2800MT doesn't boot with DVB card DVBSKY S950 PCI-E inserted (PCIe bridge DVB card: Conexant CX23885)
The problem BIOS DN2800MT!
No Problem with ASRock DN2800MT
INTEL! Fix the problem in BIOS DN2800MT!!! And other BIOS motherboards Intel!
↧
Intel DZ77RE-75K Wont shutdown
Hi my intel dz77re-75k motherboard wont power down completely when i click shutdown. I tried Windows 7 64bit, windows 8 64bit. It was shutting down but all of a sudden it stopped. I downloaded the latest intel bios for the board but not even that helped. Please assist me. All the ports of the board are working 100%. The pc works great but wont shut down.
↧
↧
After regular shutdown - Intel 82579LM - This device cannot start. (Code 10)
Hi guys,
Sorry that I create new post but this thread (Intel 82579LM - Error code 10) is little bit different cause LcsFletcher have different problem.
On my motherboard Intel DX79SI, there are 2 adapters. Intel 82574L and problematic Intel 82579LM.
Newest bios 0650 and network driver Intel 82579LM - PROWinx64_19.5
After boot of machine from poweroff state (not unplugged cable just normal Shutdown in Windows), the adapter is in warning state with error "This device cannot start. (Code 10)".
Not very nice workarounds:
- When I uninstall 82579LM as device from device manager and rescan devices, card is installed again and everything is OK and it continue work properly.
- Another method is not to shutdown PC, just reboot machine and adapter is OK.
- Disable adapter and enable it from device manager works.
I tried without succesfull:
- uninstall with driver and install drivers again
- disabling Windows to manage powerstate
- unplug all devices (Nvidia 560TI and Adaptec 5405 raid) boot without them ....
- resetting CMOS by F9 in Configuration state
- unplug battery for bios....
- older and new Intel proset drivers included Microsoft default driver from 2013
- NVM Update Utility for Intel 82579V - not works for that adapter
- Windows Safe mode and .... same operations
- Finally also reinstalled Windows - same problem
So finally, my adapter is in bad state with Error Code 10 only after boot from shutdown (not reboot)
This is strange, cause I used it for 2 years without this issue.
Masters, I am at the end of my knowledge and google does not help. Pleeeeease .....
Lukas
↧
Desktop Board DH87RL forgot 2x12 connector: P PWR Falul LED
Desktop Board DH87RL, I connect the board the to the power supply but I forgot to connect the 2x12 connector , the board don’t start and only the led R Enhanced Standby Led was on, than I verify my error and, after I have disconnect the power, I reconnected all the connectors (2x12 and 2x2), now the led R is on, but the P PWR FAUL LED is on also and only a normal beep is emitted.
↧
BOOTEAR DESDE USB EN UNA DG41WV
HOla buenas tardes.
Por favor, requiero instalar sistemas operativos varios desde una usb en la placa DG41WV.
Podrían ayudarme pleaseeee!!!@
↧
DQ67EP Replacement
Hi ,
I was wondering if someone could guide me to a replacement for the Intel mini-itx DQ67EP since it is end-of-life. Something with the same "form,fit, and function" would be great.
Thank,
steven
↧
↧
Xeon E5-2620 v3 can work with DDR4 2133 MHz
hi
i'm going to buy the SuperWorkstation 7038A-I
http://www.supermicro.com/products/system/tower/7038/SYS-7038A-i.cfm
and the XEON E5-2620 v3 processor
http://ark.intel.com/products/83356/Intel-Xeon-Processor-E5-2620-v3-20M-Cache-2_40-GHz
the motherboard says support DDR4 2133 but the processor says memory support DDR4 1600/1866
so if i buy a memory DDR4 at 2133 theres going to work or os going to be a problem??
can u help me please
↧
motherboard DDR4 2133 but the processor XEON E5-2620 v3 can't handle speed ??
hi
i'm going to buy the SuperWorkstation 7038A-I
http://www.supermicro.com/products/system/tower/7038/SYS-7038A-i.cfm
and the XEON E5-2620 v3 processor
http://ark.intel.com/products/83356/Intel-Xeon-Processor-E5-2620-v3-20M-Cache-2_40-GHz
the motherboard says support DDR4 2133 but the processor says memory support DDR4 1600/1866
so if i buy a memory DDR4 at 2133 theres going to work or os going to be a problem??
can u help me please
↧
DH61CR, after bios update, fails to boot
Hi everyone,
I have a pc with DH61CR motherboard, i5-2400, 4GB of RAM. Decided to update bios. Working bios was form year 2010. Express bios flash failed few times, with newest, and few earlier vesions. Decided to flash to next version after curent, working one. Success. Then I flashed one, from Dec 2012. Success. Bios looks different, mouse cursor, etc. Nice... The problem is, that it freezes in first BIOS window, showing Intel logo. If i press F10, i get boot devices list, but after selecting anything, it freezes, only reset helps. Bios update with F7 does not do nothing. Tried resetting BIOS, changing RAM, even CPU, without graphics card - the same. Tried BIOS recovery mode by removing jumper - no image, just cycling between on and off. Is there a way to revive motherboard? I have experience of 10 years of fixing similar issues, but I think only way now is RMA it. Any advice is very welcomed, thanks.
↧
Intel AC-7260 Wifi is Slow While Using Bluetooth
Hi,
So I have a Dell Latitude E7240 (Windows 7 Pro x64) with an Intel AC-7260 card, and while the wifi is fine during normal use, if I hook up my bluetooth speaker, the wifi speed is very slow, and seems to load small amounts of data every 10 seconds or so. I updated to the latest drivers on Intel's site, but it still seems to do the same thing. Has anyone else had this issue? What's the best way to fix it?
Thanks,
Anthony
↧
↧
Intel HD graphics causing high CPU utilization
Using the DH61AG motherboard onboard graphics with the latest Intel drivers, Task Manager showed unusually high CPU usage (up to 30%) by System (NT Kernel & System) when watching movies. I tried this without the onboard graphics and CPU utilization went down to roughly 0 for System. Using Process Explorer, I've tracked it down to ntoskml.exe!WheaAttemptPhysicalPageOffline+0x350 and dxgmms1.sys. I believe this is the Intel graphics driver making a DirectX call to page system memory. If there is a way to fix this or if I have to wait for a driver release please let me know.
↧
Using onboard graphics together with a separate graphics card
Hello
Is it possible to use onboard graphics together with a separate graphics card? I have only one paired DVI/HDMI and one VGA on my video card and I want to connect two monitors using DVI/HDMI.
MB is DZ77RE-75K
Graphics is ATI Radeon 5450
BR,
Kir
↧
intel dp965lt ME error
i get this error when i boot up my desktop.
it's quite old PC, but apart from this working just fine.
It stood still for about 2 years after power supply went, then recently i got another and decided to restart this PC.. did not work, so i removed battery and it booted with this errors :
it says :
ME failed to initialize. Press enter
then ME failed to initialize DRAM. Press enter.
then ME failed to intialize. Press enter
After this windows boots , and there no problems.
I just want to get rid of this boot errors.
Tried all three methods to flash bios to latest version. All three failed.
Bios recovery failed : 0x80000003, 1933
Iflash starts but screen goes black... no indication its doing the recovery.
PC still boots thankfully
In bios it say ME firmware version unknown.
Also, I have memory in two blue slots. if i remove one, it keep saying memory decreased. Even after several reboots. it's like bios not remembering new memory config.
But it remember date when i update.
Tried to remove battery for about 30 min but still same error
How can i simply get rid of these boot errors.
I don't mind so much that it shows windows error in device manager. Or system not running optimally. Just want to get rid of bios boot erros
thanks in advance
↧