A similar question has been asked about the DH77DF and DH67GD motherboards and CIR, but without an answer to either.
Waking a DH77DF board with CIR
Problem with power on using remote and CIR IR receiver
I have enabled CIR in the BIOS and while I can control all functions via my harmony remote (Windows Media Centre mappings) once the machine has booted. I cannot get it to boot from S5 using either the power toggle or the power on button/mappings.
I am using a Interset IR receiver, which is listed as working (on the IR manufactures page) with a DH77DF motherboard.
Intel CIR Receiver. Specialty Computer Products
I am running OpenElec 3.0.3 which includes the nuvoton cir driver, although I am assuming, given that it is loaded post boot, that the the wake from S5 functionality should work regardless of the nuvoton driver.
[ 3.297331] nuvoton_cir: driver has been successfully loaded
Can I check:
- that waking from S5 is a working feature of this motherboard.
- that there are no specific options that need to be enabled or disabled in the BIOS, other than enabling the CIR option (which I have done).
ir_header
thanks
Jamie