Hi Experts,
I have a RAID 10 volume built on the Intel ICH10R. However, currently the RAID controller seems cannot recognize the RAID volume. It displays not defined and all the four disks are marked as offline member. Each disk can be detected in both BIOS and the RAID configuration interface (press ctrl+I).
Even if I attach the four disks to another Intel chipset X58, it has the same problem.
Before the issue happens, I only change the SATA port for the disks because one SATA data cable seems has some issue. I shutdown the computer and replace one SATA cable, insert it into a different SATA port. All the 6 SATA ports are native ICH10R ports. After I start the machine again, the issue happens.
How can I recover the data on the RAID 10 volume? Thank you for the help in advance.
Bob