Hi,
I have an Intel DH67BL motherboard. rev. AAG10188-202 (the early model it seems). Serial# BTBL04700CLU.
After updating from the original bios version (0062) til the latest (0160) I can't boot the computer.
BIOS upgrade process:
* I used the F7 method for updating the BIOS
* BIOS-file was on a USB stick
* BIOS update was all success (had "done" in the 4-5 flash-steps)
* Computer automatically rebooted
The symptoms I now see are:
1. No video output (initial observation)
2. Computer does not boot
3. After trying many combinations I uninstalled all four RAM modules.
I'm not getting the expected three beeps nor blinking LED, when booting
without RAM. This scares me, as I think that if BIOS does not even detect
that there is no RAM available, then NOTHING works, but hopefully I'm
wrong about this.
What I have tried:
* BIOS recovery
- I have tried recovering with both USB- and CD-method
- I have had the PC stay overnight without CMOS battery installed
- I have been booting with screen attached to DVI and HDMI (separate boots)
* Following the steps in Anoshi's post (#18) in the following thread:
https://communities.intel.com/thread/29605?start=15&tstart=0
To no avail unfortunately.
Can you help to the next steps please.
Best Regards
Niels
Clik here to view.
