Hi All,
I could use a little assistance with BIOS options for HD boot. I have built a NAS Server with my DH77DF motherboard. I'm using an OZC 120GB SSD drive connected on SATA P0 and three WD Caviar drives on P1-3. I set the motherboard to boot off of the OZC. POST's fine, OK. I loaded VMWare ESXi 5.1 and everything loaded fine. After the initial ESX load I went to reboot and received a no boot OS found error. I grabbed a Linux live CD and ran GParted on the OZC and sure enough the OS and all drives were there. The drive was also marked as boot so I restarted the server and selected the boot menu in the BIOS. After pointing it to the OZC it fired right up, no problem. What the heck? I tried reloading it just in case, but same results. Not quite sure why the motherboard does not see the OZC as a boot drive. Is there something in the BIOS I am missing with the drives? Any help would be appreciated!
Zocko