Quantcast
Channel: Intel Communities : Discussion List - Desktop Boards
Viewing all articles
Browse latest Browse all 4926

DP55SB post fails at 4F

$
0
0

I had this happen on the previous board I had, but it would at least display video.

Board Specs are DP55SB

Proccessor: core i5 650

gpu: nvidia gtx 460

Ram: 1333 corsair 4g x2

 

This time, the post says 24, 26, 30, 36, 60, 4F or something close to that order. I need to flash the correct bios to the board but no matter where the jumper is plugged in it always goes to 4F and when I remove the jumper it acts like it is flashing the bios. When removed, it posts 24, 26, 31, 33, 36 then sits on 36 for about 2 minutes then shuts off. I have tested the board w/o RAM and it beeps. I have tested the video card in my other computer and it works. I checked the processor and it is fine. I looked at the pins on the board and they appear to be fine as well.

 

The screen is getting no display and the power shuts off from the board after about 5 seconds.

 

Any help would be amazing.

 

Thanks


Viewing all articles
Browse latest Browse all 4926

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>