Hello everyone,
I recently got the Nuc Kit D54250WYK .
The memory sticks are the recommended two 4Gbits DDR3 1333 MHz and the mSATA 120GB.
I was able to launch Unbuntu 13.10 in EFI mode using the updated WY0024.BIO.
It worked fine the first two days.
Then I decided too look in the different mode of the EFI and I unchecked the legacy mode.
Of course, the computer didn’t reboot. And I don’t have access to the setup anymore, I don’t see anything
on my computer screen, no logos, no « F2 to … F7 to … F10 to… »
I tried taking off the configuration jumper, and I was able to reset the configuration and even reflash
the BIOS with the latest BIOS update : WY0024.BIO and proceeded by following the « BIOS Update Readme.pdf »
I saw the line “ the flash updated successfully”. On reboot, the screen still doesn’t show up.
Removing the cmos battery for more than 1 hour did not change anything either.
Do you have any information that could help unbricking the system ?