Hello there,
did have a lousy weekend due to a failure of this board Bios 3,17
got this board just yesterday and installed a GTS 450 Graphics, i5-4570, 8gb kingston valueram and some other components.
Everything worked until I made some BIOS settings changes (from legacy boot back to uefi boot, perhaps i deactivated internal graphics in advance)
after softreset, screen blanked and beeped twice two times. no chance to get in bios, no chance by reseating card, not even without card and internal graphics only.
So I tried to reset bios, but I think that is not working by putting out the battery.
So i tried this Bios Jumper to reset:
-> Screen didn't blank any more, short time to see the POST screen, but without ability to get in the bios.
Screen printed that I [1] suppress this message [2] delete passwords [3] some information about TPM
So hopefully hard resetted after putting back the jumper
-> beep beep , screen blank
so what to do?
Screen blanks as soon as i put in the jumper again, without it i do not have a chance to alter bios settings...